X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2FAlaska8220.h;h=38b962f8232c8c6d61aa5175a84af8e5572103c1;hb=16116ddd0d0158f4e91c91dc979b845b6e98a99d;hp=c08b2c39f8854a08f8b6b5260499b77c8afdca45;hpb=038ccac511214b062c56f22b9413f784b86bcd87;p=u-boot

diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h
index c08b2c39f8..38b962f823 100644
--- a/include/configs/Alaska8220.h
+++ b/include/configs/Alaska8220.h
@@ -31,6 +31,8 @@
 #define CONFIG_MPC8220		1
 #define CONFIG_ALASKA8220	1	/* ... on Alaska board	*/
 
+#define CONFIG_HIGH_BATS	1	/* High BATs supported */
+
 /* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to
    determine the CPU speed. */
 #define CFG_MPC8220_CLKIN	30000000/* ... running at 30MHz */
@@ -39,12 +41,6 @@
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	*/
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC8220 CPUs */
-
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5   /* log base 2 of the above value */
-#endif
-
 /*
  * Serial console configuration
  */
@@ -70,31 +66,40 @@
 
 #define CONFIG_TIMESTAMP			/* Print image info with timestamp */
 
+
 /*
- * Supported commands
+ * BOOTP options
  */
-#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
-				CFG_CMD_BOOTD	| \
-				CFG_CMD_CACHE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_DIAG	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_NET	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_PING	| \
-				CFG_CMD_REGINFO | \
-				CFG_CMD_SDRAM	| \
-				CFG_CMD_SNTP	)
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
 
 #define CONFIG_NET_MULTI
 #define CONFIG_MII
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 /*
  * Autobooting
  */
@@ -282,7 +287,7 @@
  */
 #define CFG_LONGHELP			    /* undef to save memory	*/
 #define CFG_PROMPT		"=> "	    /* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	    /* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE		256	    /* Console I/O Buffer Size	*/
@@ -298,6 +303,11 @@
 
 #define CFG_HZ			1000	    /* decrementer freq: 1 ms ticks */
 
+#define CFG_CACHELINE_SIZE	32	/* For MPC8220 CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5   /* log base 2 of the above value */
+#endif
+
 /*
  * Various low-level settings
  */