X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2FC29XPCIE.h;h=629a326d7b4b6984a7ab66027495cd0ed4cb032a;hb=91c868fe7cd;hp=8ec1a90595c42486e2518f90fa537fa1760a0c5d;hpb=76f1f38816d8763b51e5f1d6ca099a88aa1fd077;p=u-boot

diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h
index 8ec1a90595..629a326d7b 100644
--- a/include/configs/C29XPCIE.h
+++ b/include/configs/C29XPCIE.h
@@ -11,12 +11,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_DISPLAY_BOARDINFO
-
-#ifdef CONFIG_C29XPCIE
-#define CONFIG_PPC_C29X
-#endif
-
 #ifdef CONFIG_SPIFLASH
 #define CONFIG_RAMBOOT_SPIFLASH
 #define CONFIG_SYS_TEXT_BASE		0x11000000
@@ -27,15 +21,8 @@
 #ifdef CONFIG_TPL_BUILD
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_TPL_ENV_SUPPORT
 #define CONFIG_SPL_NAND_INIT
-#define CONFIG_TPL_SERIAL_SUPPORT
-#define CONFIG_TPL_LIBGENERIC_SUPPORT
-#define CONFIG_TPL_LIBCOMMON_SUPPORT
-#define CONFIG_TPL_I2C_SUPPORT
 #define CONFIG_TPL_DRIVERS_MISC_SUPPORT
-#define CONFIG_TPL_NAND_SUPPORT
-#define CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_COMMON_INIT_DDR
 #define CONFIG_SPL_MAX_SIZE		(128 << 10)
 #define CONFIG_SPL_TEXT_BASE		0xf8f81000
@@ -46,8 +33,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	((128 + 128) << 10)
 #elif defined(CONFIG_SPL_BUILD)
 #define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TEXT_BASE		0xff800000
@@ -83,13 +68,8 @@
 #endif
 
 /* High Level Configuration Options */
-#define CONFIG_BOOKE			/* BOOKE */
-#define CONFIG_E500			/* BOOKE e500 family */
-#define CONFIG_FSL_IFC			/* Enable IFC Support */
-#define CONFIG_FSL_CAAM			/* Enable SEC/CAAM */
 #define CONFIG_SYS_HAS_SERDES		/* common SERDES init code */
 
-#define CONFIG_PCI			/* Enable PCI/PCIE */
 #ifdef CONFIG_PCI
 #define CONFIG_PCIE1			/* PCIE controller 1 (slot 1) */
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
@@ -114,13 +94,9 @@
 #define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
 #define CONFIG_SYS_PCIE1_IO_PHYS	0xfffc00000ull
 
-#define CONFIG_PCI_PNP			/* do pci plug-and-play */
-
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif
 
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
 #define CONFIG_TSEC_ENET
 #define CONFIG_ENV_OVERWRITE
 
@@ -147,7 +123,6 @@
 #define CONFIG_PANIC_HANG
 
 /* DDR Setup */
-#define CONFIG_SYS_FSL_DDR3
 #define CONFIG_DDR_SPD
 #define CONFIG_SYS_SPD_BUS_NUM		0
 #define SPD_EEPROM_ADDRESS		0x50
@@ -174,10 +149,6 @@
 			(0xf00000000ull | CONFIG_SYS_PLATFORM_SRAM_BASE)
 #define CONFIG_SYS_PLATFORM_SRAM_SIZE	(512 << 10)
 
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_NO_FLASH
-#endif
-
 /*
  * IFC Definitions
  */
@@ -383,8 +354,6 @@
 #define CONFIG_NS16550_MIN_FUNCTIONS
 #endif
 
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 
@@ -402,7 +371,6 @@
 
 /* I2C EEPROM */
 /* enable read and write access to EEPROM */
-#define CONFIG_CMD_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
@@ -436,7 +404,6 @@
  */
 #if defined(CONFIG_SYS_RAMBOOT)
 #if defined(CONFIG_RAMBOOT_SPIFLASH)
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SPI_BUS	0
 #define CONFIG_ENV_SPI_CS	0
 #define CONFIG_ENV_SPI_MAX_HZ	10000000
@@ -446,7 +413,6 @@
 #define CONFIG_ENV_SIZE		0x2000
 #endif
 #elif defined(CONFIG_NAND)
-#define CONFIG_ENV_IS_IN_NAND
 #ifdef CONFIG_TPL_BUILD
 #define CONFIG_ENV_SIZE		0x2000
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
@@ -456,7 +422,6 @@
 #endif
 #define CONFIG_ENV_OFFSET	CONFIG_SYS_NAND_BLOCK_SIZE
 #else
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE		0x2000
 #define CONFIG_ENV_SECT_SIZE	0x20000
@@ -468,16 +433,8 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_IRQ
 #define CONFIG_CMD_REGINFO
 
-/* Hash command with SHA acceleration supported in hardware */
-#ifdef CONFIG_FSL_CAAM
-#define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
-#endif
-
 /*
  * Miscellaneous configurable options
  */
@@ -516,9 +473,6 @@
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR		1000000
 
-
-#define CONFIG_BAUDRATE		115200
-
 #define CONFIG_DEF_HWCONFIG	fsl_ddr:ecc=on
 
 #define	CONFIG_EXTRA_ENV_SETTINGS				\