X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2FGEN860T.h;h=9a649ca125fec2ca3682c93aa18ab1d35075ce00;hb=41d910118cfd30c802e037bab70754fbe5f04c7e;hp=8f18ab242d742ebcd75090b4a38ba56101336abc;hpb=0d8cb9c04facc029baf4beee5a7e389be343a915;p=u-boot

diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index 8f18ab242d..9a649ca125 100644
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -35,6 +35,8 @@
 #define CONFIG_MPC860
 #define CONFIG_GEN860T
 
+#define	CONFIG_SYS_TEXT_BASE		0x40000000
+
 /*
  * Identify the board
  */
@@ -61,16 +63,6 @@
 #define	CONFIG_8xx_CONS_SMC1
 #define CONFIG_BAUDRATE			38400
 
-/*
- * Set allowable console baud rates
- */
-#define CONFIG_SYS_BAUDRATE_TABLE		{ 9600,		\
-					  19200,	\
-					  38400,	\
-					  57600,	\
-					  115200,	\
-					}
-
 /*
  * Print console information
  */
@@ -103,11 +95,6 @@
 #undef	CONFIG_LOADS_ECHO
 #define	CONFIG_SYS_LOADS_BAUD_CHANGE
 
-/*
- * Set default load address for tftp network downloads
- */
-#define	CONFIG_SYS_TFTP_LOADADDR				0x01000000
-
 /*
  * Turn off the watchdog timer
  */
@@ -244,10 +231,6 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_BEDBUG
 
-#if !defined(CONFIG_SC)
-    #define CONFIG_CMD_DOC
-#endif
-
 #ifdef CONFIG_POST
 #define CONFIG_CMD_DIAG
 #endif
@@ -279,9 +262,6 @@
 #define CONFIG_FPGA_VIRTEX2
 #define CONFIG_SYS_FPGA_PROG_FEEDBACK
 
-
-#define CONFIG_NAND_LEGACY
-
 /*
  * Verbose help from command monitor.
  */
@@ -297,7 +277,6 @@
  * Use the "hush" command parser
  */
 #define	CONFIG_SYS_HUSH_PARSER
-#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 /*
  * Set buffer size for console I/O
@@ -387,9 +366,9 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR		CONFIG_SYS_IMMR
-#define	CONFIG_SYS_INIT_RAM_END		0x2F00	/* End of used area in DPRAM		*/
+#define	CONFIG_SYS_INIT_RAM_SIZE		0x2F00	/* Size of used area in DPRAM		*/
 #define	CONFIG_SYS_INIT_DATA_SIZE		64	/* # bytes reserved for initial data*/
-#define CONFIG_SYS_GBL_DATA_OFFSET		(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET		(CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_DATA_SIZE)
 #define	CONFIG_SYS_INIT_SP_OFFSET		CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
@@ -731,22 +710,6 @@
 						  BR_V						  \
 						)
 
-/*
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02	/* Software reboot					*/
-
-/*
- * Disk On Chip (millenium) configuration
- */
-#if !defined(CONFIG_SC)
-#define CONFIG_SYS_MAX_DOC_DEVICE	1
-#undef	CONFIG_SYS_DOC_SUPPORT_2000
-#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
-#undef	CONFIG_SYS_DOC_PASSIVE_PROBE
-#endif
-
 /*
  * FEC interrupt assignment
  */