X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2FKAREF.h;h=3daf480656bfa5697472d84eb0c6705a37cf700d;hb=f3fcf92d595b297b47a1b58b8ec39f93f40ef912;hp=05f7254fca3a1246713c55233d999e51ca57a634;hpb=800eb09641ae67c707b65acff112684a954b7f44;p=u-boot

diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h
index 05f7254fca..3daf480656 100644
--- a/include/configs/KAREF.h
+++ b/include/configs/KAREF.h
@@ -43,6 +43,9 @@
 #define CONFIG_BOARD_EARLY_INIT_F 1	     /* Call board_pre_init	*/
 #define CONFIG_MISC_INIT_F	  1	     /* Call board misc_init_f	*/
 #define CONFIG_MISC_INIT_R	  1	     /* Call board misc_init_r	*/
+
+#define	CONFIG_SYS_TEXT_BASE	0xFFF80000
+
 #undef	CONFIG_SYS_DRAM_TEST			     /* Disable-takes long time!*/
 #define CONFIG_SYS_CLK_FREQ	  66666666   /* external freq to pll	*/
 
@@ -59,7 +62,6 @@
 #define CONFIG_SYS_FLASH_BASE	       0xfff80000    /* start of FLASH		*/
 #define CONFIG_SYS_MONITOR_BASE       0xfff80000    /* start of monitor	*/
 #define CONFIG_SYS_PCI_MEMBASE	       0x80000000    /* mapped pci memory	*/
-#define CONFIG_SYS_PERIPHERAL_BASE    0xe0000000    /* internal peripherals	*/
 #define CONFIG_SYS_ISRAM_BASE	       0xc0000000    /* internal SRAM		*/
 #define CONFIG_SYS_PCI_BASE	       0xd0000000    /* internal PCI regs	*/
 
@@ -78,10 +80,9 @@
 #define CONFIG_SYS_TEMP_STACK_OCM    1
 #define CONFIG_SYS_OCM_DATA_ADDR     CONFIG_SYS_ISRAM_BASE
 #define CONFIG_SYS_INIT_RAM_ADDR     CONFIG_SYS_ISRAM_BASE /* Initial RAM address	*/
-#define CONFIG_SYS_INIT_RAM_END      0x2000	     /* End of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_SIZE     128	     /* num bytes initial data	*/
+#define CONFIG_SYS_INIT_RAM_SIZE      0x2000	     /* Size of used area in RAM */
 
-#define CONFIG_SYS_GBL_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET    (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 #define CONFIG_SYS_MONITOR_LEN	      (256 * 1024)   /* Rsrv 256kB for Mon	*/
@@ -90,7 +91,11 @@
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
-#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CONFIG_CONS_INDEX	1	/* Use UART0			*/
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
 #define CONFIG_SERIAL_MULTI   1
 #define CONFIG_BAUDRATE	      9600
 
@@ -159,7 +164,6 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII	      1		     /* MII PHY management	*/
-#define CONFIG_NET_MULTI      1
 #define CONFIG_PHY_ADDR	      0xff	     /* no phy on EMAC0		*/
 #define CONFIG_PHY1_ADDR      0xff	     /* no phy on EMAC1		*/
 #define CONFIG_PHY2_ADDR      0x08	     /* PHY addr, MGMT, EMAC2	*/
@@ -219,7 +223,6 @@
 #define CONFIG_SYS_PROMPT	      "KaRefDes=> "  /* Monitor Command Prompt	*/
 
 #define CONFIG_SYS_HUSH_PARSER	       1	     /* HUSH for ext'd cli	*/
-#define CONFIG_SYS_PROMPT_HUSH_PS2    "> "
 
 
 /*-----------------------------------------------------------------------
@@ -283,14 +286,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	      0x01	     /* Normal PowerOn: Boot from FLASH */
-#define BOOTFLAG_WARM	      0x02	     /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE  230400	     /* kgdb serial port baud	*/
 #define CONFIG_KGDB_SER_INDEX 2		     /* kgdb serial port	*/