X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2FKAREF.h;h=94cc31756c6eb4dfef2ce1ce6736cd4752d39d2f;hb=cacc342d5aa311673efdc05770cb53246dd41c9f;hp=403081d0d2b981b4e62fa2e69099775f3fc61920;hpb=6d0f6bcf337c5261c08fabe12982178c2c489d76;p=u-boot

diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h
index 403081d0d2..94cc31756c 100644
--- a/include/configs/KAREF.h
+++ b/include/configs/KAREF.h
@@ -59,7 +59,6 @@
 #define CONFIG_SYS_FLASH_BASE	       0xfff80000    /* start of FLASH		*/
 #define CONFIG_SYS_MONITOR_BASE       0xfff80000    /* start of monitor	*/
 #define CONFIG_SYS_PCI_MEMBASE	       0x80000000    /* mapped pci memory	*/
-#define CONFIG_SYS_PERIPHERAL_BASE    0xe0000000    /* internal peripherals	*/
 #define CONFIG_SYS_ISRAM_BASE	       0xc0000000    /* internal SRAM		*/
 #define CONFIG_SYS_PCI_BASE	       0xd0000000    /* internal PCI regs	*/
 
@@ -82,8 +81,7 @@
 #define CONFIG_SYS_GBL_DATA_SIZE     128	     /* num bytes initial data	*/
 
 #define CONFIG_SYS_GBL_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR    (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET    CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET    (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 #define CONFIG_SYS_MONITOR_LEN	      (256 * 1024)   /* Rsrv 256kB for Mon	*/
 #define CONFIG_SYS_MALLOC_LEN	      (128 * 1024)   /* Rsrv 128kB for malloc	*/
@@ -91,7 +89,11 @@
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
-#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CONFIG_CONS_INDEX	1	/* Use UART0			*/
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
 #define CONFIG_SERIAL_MULTI   1
 #define CONFIG_BAUDRATE	      9600
 
@@ -132,6 +134,7 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_HARD_I2C	      1		     /* I2C hardware support	*/
 #undef	CONFIG_SOFT_I2C			     /* I2C !bit-banged		*/
+#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
 #define CONFIG_SYS_I2C_SPEED	      400000	     /* I2C speed 400kHz	*/
 #define CONFIG_SYS_I2C_SLAVE	      0x7F	     /* I2C slave address	*/
 #define CONFIG_SYS_I2C_NOPROBES      {0x69}	     /* Don't probe these addrs */
@@ -157,6 +160,7 @@
 /*-----------------------------------------------------------------------
  * Networking
  *----------------------------------------------------------------------*/
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII	      1		     /* MII PHY management	*/
 #define CONFIG_NET_MULTI      1
 #define CONFIG_PHY_ADDR	      0xff	     /* no phy on EMAC0		*/