X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2FM54455EVB.h;h=b623c33318aa918391f04d6b3d780955da51918d;hb=d9354530fe3a891718e3a9b88a756545c3891475;hp=86faa3df8f4da23ba3d8b7413eba0b17cf1a76e1;hpb=0c0892be0d93a5a892b93739c5eb3bf692fed4ff;p=u-boot

diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index 86faa3df8f..b623c33318 100644
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -41,7 +41,6 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
 
 #undef CONFIG_WATCHDOG
 
@@ -85,7 +84,6 @@
 /* Network configuration */
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#	define CONFIG_NET_MULTI		1
 #	define CONFIG_MII		1
 #	define CONFIG_MII_INIT		1
 #	define CONFIG_SYS_DISCOVER_PHY
@@ -134,7 +132,7 @@
 	"load=tftp ${loadaddr} ${sbfhdr};"	\
 	"tftp " MK_STR(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0"	\
 	"upd=run load; run prog\0"		\
-	"prog=sf probe 0:1 10000 1;"		\
+	"prog=sf probe 0:1 1000000 3;"		\
 	"sf erase 0 30000;"			\
 	"sf write ${loadaddr} 0 0x30000;"	\
 	"save\0"				\
@@ -304,13 +302,16 @@
 #define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 
 #ifdef CONFIG_CF_SBF
+#	define CONFIG_SERIAL_BOOT
 #	define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_TEXT_BASE + 0x400)
 #else
 #	define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
 #endif
 #define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
+
+/* Reserve 256 kB for malloc() */
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
 
 /*
  * For booting Linux, the board info and command line data
@@ -322,7 +323,8 @@
 
 /*
  * Configuration for environment
- * Environment is embedded in u-boot in the second sector of the flash
+ * Environment is not embedded in u-boot. First time runing may have env
+ * crc error warning if there is no correct environment on the flash.
  */
 #ifdef CONFIG_CF_SBF
 #	define CONFIG_ENV_IS_IN_SPI_FLASH
@@ -346,8 +348,9 @@
 #	define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
 #	define CONFIG_SYS_FLASH0_BASE		CONFIG_SYS_CS0_BASE
 #	define CONFIG_SYS_FLASH1_BASE		CONFIG_SYS_CS1_BASE
-#	define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x4000)
-#	define CONFIG_ENV_SECT_SIZE	0x2000
+#	define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x40000)
+#	define CONFIG_ENV_SIZE		0x2000
+#	define CONFIG_ENV_SECT_SIZE	0x10000
 #endif
 #ifdef CONFIG_SYS_INTEL_BOOT
 #	define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE