X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2FMIP405.h;h=9961fb55ca509c3e6c6381bad334837e21ef4dd8;hb=877012df309329a9264e6e9558d4f71bfa0cddbe;hp=e833e6d193366c50ddb9cb59478031cb7abd4ae7;hpb=550650ddd0fde00f245bc3da72d7272844198394;p=u-boot

diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index e833e6d193..9961fb55ca 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -35,6 +35,9 @@
 #define CONFIG_405GP		1	/* This is a PPC405 CPU		*/
 #define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
 #define CONFIG_MIP405		1	/* ...on a MIP405 board		*/
+
+#define	CONFIG_SYS_TEXT_BASE	0xFFF80000
+
 /***********************************************************
  * Note that it may also be a MIP405T board which is a subset of the
  * MIP405
@@ -236,11 +239,17 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_UPDATE_FLASH_SIZE
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
 
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_FLASH_SHOW_PROGRESS	45
+
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_SECT	256
 
 /*
  * JFFS2 partitions
@@ -288,6 +297,7 @@
 #define FLASH_SIZE_PRELIM	 3  /* maximal flash FLASH size bank #0	*/
 
 #define CONFIG_BOARD_EARLY_INIT_F 1
+#define CONFIG_BOARD_EARLY_INIT_R
 
 /* Peripheral Bus Mapping */
 #define PER_PLD_ADDR		0xF4000000 /* smallest window is 1MByte 0x10 0000*/
@@ -305,29 +315,15 @@
 #define CONFIG_SYS_OCM_DATA_ADDR	0xF0000000
 #define CONFIG_SYS_OCM_DATA_SIZE	0x1000
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR	/* inside of On Chip SRAM    */
-#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE	/* End of On Chip SRAM	       */
-#define CONFIG_SYS_GBL_DATA_SIZE	64		/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_OCM_DATA_SIZE	/* Size of On Chip SRAM	       */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 /* reserve some memory for POST and BOOT limit info */
 #define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 32)
 
-#ifdef  CONFIG_POST		/* reserve one word for POST Info */
-#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 4)
-#endif
-
 #ifdef CONFIG_BOOTCOUNT_LIMIT /* reserve 2 word for bootcount limit */
 #define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 12)
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-
 /***********************************************************************
  * External peripheral base address
  ***********************************************************************/
@@ -345,7 +341,6 @@
 #define CONFIG_PHY_ADDR		1	/* PHY address			*/
 #define CONFIG_PHY_RESET_DELAY	300	/* Intel LXT971A needs this */
 #define CONFIG_PHY_CMD_DELAY	40	/* Intel LXT971A needs this */
-#define CONFIG_NET_MULTI
 /************************************************************
  * RTC
  ***********************************************************/