X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2FML2.h;h=4df9f4cbc5e8ce3b6d92dac4bbeac52e59f742df;hb=cfeba45f505290ec719076dd174727d10045aa2b;hp=8f56902e63e225371fafd6e74026c6fc37c6783e;hpb=d48455ad8cefd25d7b49f68fd16d0e9fd551732a;p=u-boot

diff --git a/include/configs/ML2.h b/include/configs/ML2.h
index 8f56902e63..4df9f4cbc5 100644
--- a/include/configs/ML2.h
+++ b/include/configs/ML2.h
@@ -31,6 +31,7 @@
 #define CONFIG_ML2	1	/* ...on a ML2 board	*/
 
 #define	CONFIG_SYS_TEXT_BASE	0x18000000
+#define CONFIG_SYS_LDSCRIPT	"board/ml2/u-boot.lds"
 
 #define CONFIG_ENV_IS_IN_FLASH     1
 
@@ -88,6 +89,7 @@
 #define CONFIG_CMD_JFFS2
 
 #undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
 #undef CONFIG_CMD_RTC
 #undef CONFIG_CMD_PCI
 #undef CONFIG_CMD_I2C
@@ -99,6 +101,14 @@
 
 #define CONFIG_SPD_EEPROM      1       /* use SPD EEPROM for setup    */
 
+/*
+ * I2C
+ */
+#define CONFIG_HARD_I2C			/* I2C with hardware support	*/
+#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
+#define CONFIG_SYS_I2C_SLAVE	0x7F
+#define CONFIG_SYS_I2C_SPEED	400000
+
 /*
  * Miscellaneous configurable options
  */
@@ -211,9 +221,8 @@
  */
 
 #define CONFIG_SYS_INIT_RAM_ADDR       0x800000  /* inside of SDRAM                     */
-#define CONFIG_SYS_INIT_RAM_END        0x2000  /* End of used area in RAM             */
-#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE        0x2000  /* Size of used area in RAM             */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -222,14 +231,6 @@
  */
 #define SPD_EEPROM_ADDRESS      0x50
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */