X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8308RDB.h;h=578325cd05ebf3a31e28893bf66a03d932aefdd1;hb=66669fcf809c1e3ff644b12e04e625d3737ffd8e;hp=2d48dde808478b71646549a6d37a4d3133eb9a2b;hpb=db1fc7d28e8947c402149ded4597970fdb3e5571;p=u-boot diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index 2d48dde808..578325cd05 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -3,33 +3,19 @@ * Copyright (C) 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com * * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_DISPLAY_BOARDINFO + /* * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 family */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ +#define CONFIG_MPC830x 1 /* MPC830x family */ #define CONFIG_MPC8308 1 /* MPC8308 CPU specific */ #define CONFIG_MPC8308RDB 1 /* MPC8308RDB board specific */ @@ -37,10 +23,6 @@ #define CONFIG_MISC_INIT_R -/* new uImage format support */ -#define CONFIG_FIT 1 -#define CONFIG_FIT_VERBOSE 1 - #define CONFIG_MMC 1 #ifdef CONFIG_MMC @@ -49,9 +31,7 @@ #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ESDHC_USE_PIO -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif @@ -329,7 +309,6 @@ * Serial Port */ #define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) @@ -340,23 +319,16 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* Pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_STDOUT_VIA_ALIAS 1 - /* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_FSL_I2C -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x51} } /* Don't probe these addrs */ -#define CONFIG_SYS_I2C_OFFSET 0x3000 -#define CONFIG_SYS_I2C2_OFFSET 0x3100 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_FSL +#define CONFIG_SYS_FSL_I2C_SPEED 400000 +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 +#define CONFIG_SYS_FSL_I2C2_SPEED 400000 +#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 +#define CONFIG_SYS_I2C_NOPROBES { {0, 0x51} } /* * SPI on header J8 @@ -365,11 +337,7 @@ * due to a pinmux conflict between GPIO9 (SPI chip select )and the TSEC2 pins. */ #ifdef CONFIG_MPC8XXX_SPI -#define CONFIG_CMD_SPI #define CONFIG_USE_SPIFLASH -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_SPANSION -#define CONFIG_CMD_SF #endif /* @@ -401,6 +369,7 @@ #define CONFIG_SYS_SCCR_PCIEXP1CM 1 #define CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_PCIE #define CONFIG_PCI_PNP /* do pci plug-and-play */ @@ -458,15 +427,8 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_NET #define CONFIG_CMD_PCI -#define CONFIG_CMD_PING #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ @@ -475,7 +437,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -484,7 +445,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data @@ -554,10 +514,6 @@ #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ -#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ - -#define xstr(s) str(s) -#define str(s) #s #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ @@ -592,10 +548,10 @@ "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ "bootcmd=run flash_self\0" \ "load=tftp ${loadaddr} ${u-boot}\0" \ - "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) \ - " +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE) \ + "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \ + " +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\ " +${filesize};cp.b ${fileaddr} " \ - xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \ + __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \ "upd=run load update\0" \ #endif /* __CONFIG_H */