X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC832XEMDS.h;h=be2ab455843bcb7429698199a3e13c34669cc3f0;hb=a7ba32d480a86db5db8dcd8ca66b21b4cadda923;hp=1984157e1cf4891a486dd28f5b3659d3ff356453;hpb=8ea5499afdaba0acf60923dd99001c399d4a7c8e;p=u-boot

diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index 1984157e1c..be2ab45584 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -20,8 +20,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#undef DEBUG
-
 /*
  * High Level Configuration Options
  */
@@ -30,6 +28,8 @@
 #define CONFIG_MPC83XX		1	/* MPC83xx family */
 #define CONFIG_MPC832X		1	/* MPC832x CPU specific */
 #define CONFIG_MPC832XEMDS	1	/* MPC832XEMDS board specific */
+#undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */
+#undef CONFIG_PQ_MDS_PIB_ATM	/* QOC3 ATM card */
 
 /*
  * System Clock Setup
@@ -87,6 +87,7 @@
 #define CFG_SICRL		0x00000000
 
 #define CONFIG_BOARD_EARLY_INIT_F	/* call board_pre_init */
+#define CONFIG_BOARD_EARLY_INIT_R
 
 /*
  * IMMR new address
@@ -142,6 +143,7 @@
 #undef  CFG_RAMBOOT
 #endif
 
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
 #define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
 #define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
 
@@ -315,17 +317,9 @@
 #endif
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
-
-/* maximum size of the flat tree (8K) */
-#define OF_FLAT_TREE_MAX_SIZE	8192
-
-#define OF_CPU			"PowerPC,8323@0"
-#define OF_SOC			"soc8323@e0000000"
-#define OF_QE			"qe@e0100000"
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH		"/soc8323@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
@@ -352,7 +346,7 @@
 #define CFG_PCI_MMIO_BASE	0x90000000
 #define CFG_PCI_MMIO_PHYS	CFG_PCI_MMIO_BASE
 #define CFG_PCI_MMIO_SIZE	0x10000000	/* 256M */
-#define CFG_PCI_IO_BASE		0xE0300000
+#define CFG_PCI_IO_BASE		0x00000000
 #define CFG_PCI_IO_PHYS		0xE0300000
 #define CFG_PCI_IO_SIZE		0x100000	/* 1M */
 
@@ -381,7 +375,7 @@
  * QE UEC ethernet configuration
  */
 #define CONFIG_UEC_ETH
-#define CONFIG_ETHPRIME		"Freescale GETH"
+#define CONFIG_ETHPRIME		"FSL UEC0"
 
 #define CONFIG_UEC_ETH1		/* ETH3 */
 
@@ -410,8 +404,8 @@
  */
 #ifndef CFG_RAMBOOT
 	#define CFG_ENV_IS_IN_FLASH	1
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-	#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+	#define CFG_ENV_SECT_SIZE	0x20000
 	#define CFG_ENV_SIZE		0x2000
 #else
 	#define CFG_NO_FLASH		1	/* Flash is not usable now */
@@ -423,6 +417,15 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */
@@ -476,15 +479,6 @@
 #define CFG_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
 #define CFG_HID2		HID2_HBE
 
-/*
- * Cache Config
- */
-#define CFG_DCACHE_SIZE		16384
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value */
-#endif
-
 /*
  * MMU Setup
  */
@@ -570,6 +564,7 @@
 #define CONFIG_ENV_OVERWRITE
 
 #if defined(CONFIG_UEC_ETH)
+#define CONFIG_HAS_ETH0
 #define CONFIG_ETHADDR	00:04:9f:ef:03:01
 #define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR	00:04:9f:ef:03:02
@@ -588,7 +583,7 @@
    "ramdiskaddr=1000000\0"						\
    "ramdiskfile=ramfs.83xx\0"						\
    "fdtaddr=400000\0"							\
-   "fdtfile=mpc832xemds.dtb\0"						\
+   "fdtfile=mpc832x_mds.dtb\0"						\
    ""
 
 #define CONFIG_NFSBOOTCOMMAND						\