X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8349EMDS.h;h=c8870b54ae10a02835e6ad22f1032d92aa44afd7;hb=650a9e7abc44ce1ce73d6668eaf0ba2d6b8025e9;hp=07f2f30ef87726a30e0162b672ca70aade7d7da2;hpb=ed3afca32e1b28e441bc9f4b804edac47686554e;p=u-boot

diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 07f2f30ef8..c8870b54ae 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -29,8 +29,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#undef DEBUG
-
 /*
  * High Level Configuration Options
  */
@@ -41,7 +39,7 @@
 #define CONFIG_MPC8349EMDS	1	/* MPC8349EMDS board specific */
 
 #undef CONFIG_PCI
-#undef CONFIG_MPC83XX_PCI2 		/* support for 2nd PCI controller */
+#undef CONFIG_MPC83XX_PCI2		/* support for 2nd PCI controller */
 
 #define PCI_66M
 #ifdef PCI_66M
@@ -50,6 +48,11 @@
 #define CONFIG_83XX_CLKIN	33000000	/* in Hz */
 #endif
 
+#ifdef CONFIG_PCISLAVE
+#define CONFIG_PCI
+#define CONFIG_83XX_PCICLK	66666666	/* in Hz */
+#endif /* CONFIG_PCISLAVE */
+
 #ifndef CONFIG_SYS_CLK_FREQ
 #ifdef PCI_66M
 #define CONFIG_SYS_CLK_FREQ	66000000
@@ -150,7 +153,7 @@
  * FLASH on the Local Bus
  */
 #define CFG_FLASH_CFI				/* use the Common Flash Interface */
-#define CFG_FLASH_CFI_DRIVER			/* use the CFI driver */
+#define CONFIG_FLASH_CFI_DRIVER			/* use the CFI driver */
 #define CFG_FLASH_BASE		0xFE000000	/* start of FLASH   */
 #define CFG_FLASH_SIZE		32		/* max flash size in MB */
 /* #define CFG_FLASH_USE_BUFFER_WRITE */
@@ -159,7 +162,7 @@
 				(2 << BR_PS_SHIFT) |	/* 16 bit port size */	 \
 				BR_V)			/* valid */
 #define CFG_OR0_PRELIM		((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
-				OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
+				OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
 				OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
 #define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE	/* window base at flash base */
 #define CFG_LBLAWAR0_PRELIM	0x80000018	/* 32 MB window size */
@@ -356,7 +359,7 @@
 #define CFG_I2C2_OFFSET		0x3100
 
 /* SPI */
-#define CONFIG_HARD_SPI			/* SPI with hardware support */
+#define CONFIG_MPC8XXX_SPI
 #undef CONFIG_SOFT_SPI			/* SPI bit-banged */
 
 /* GPIOs.  Used as SPI chip selects */
@@ -408,6 +411,8 @@
 
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP		/* do pci plug-and-play */
+#define CONFIG_83XX_GENERIC_PCI
+#define CONFIG_83XX_PCI_STREAMING
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
@@ -415,11 +420,11 @@
 #if !defined(CONFIG_PCI_PNP)
 	#define PCI_ENET0_IOADDR	0xFIXME
 	#define PCI_ENET0_MEMADDR	0xFIXME
-	#define PCI_IDSEL_NUMBER	0x0c 	/* slot0->3(IDSEL)=12->15 */
+	#define PCI_IDSEL_NUMBER	0x0c	/* slot0->3(IDSEL)=12->15 */
 #endif
 
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
+#define CFG_PCI_SUBSYS_VENDORID 0x1957  /* Freescale */
 
 #endif	/* CONFIG_PCI */
 
@@ -575,6 +580,20 @@
 	HRCWL_CORE_TO_CSB_1X1)
 #endif
 
+#ifdef CONFIG_PCISLAVE
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_AGENT |\
+	HRCWH_64_BIT_PCI |\
+	HRCWH_PCI1_ARBITER_DISABLE |\
+	HRCWH_PCI2_ARBITER_DISABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0X00000100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_TSEC1M_IN_GMII |\
+	HRCWH_TSEC2M_IN_GMII )
+#else
 #if defined(PCI_64BIT)
 #define CFG_HRCW_HIGH (\
 	HRCWH_PCI_HOST |\
@@ -601,7 +620,18 @@
 	HRCWH_ROM_LOC_LOCAL_16BIT |\
 	HRCWH_TSEC1M_IN_GMII |\
 	HRCWH_TSEC2M_IN_GMII )
-#endif
+#endif /* PCI_64BIT */
+#endif /* CONFIG_PCISLAVE */
+
+/*
+ * System performance
+ */
+#define CFG_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
+#define CFG_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
+#define CFG_SPCR_TSEC1EP	3	/* TSEC1 emergency priority (0-3) */
+#define CFG_SPCR_TSEC2EP	3	/* TSEC2 emergency priority (0-3) */
+#define CFG_SCCR_TSEC1CM	1	/* TSEC1 clock mode (0-3) */
+#define CFG_SCCR_TSEC2CM	1	/* TSEC2 & I2C0 clock mode (0-3) */
 
 /* System IO Config */
 #define CFG_SICRH SICRH_TSOBI1
@@ -617,6 +647,7 @@
 
 
 #define CFG_HID2 HID2_HBE
+#define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /* DDR @ 0x00000000 */
 #define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
@@ -710,7 +741,7 @@
 #define CONFIG_GATEWAYIP	192.168.1.1
 #define CONFIG_NETMASK		255.255.255.0
 
-#define CONFIG_LOADADDR		200000	/* default location for tftp and bootm */
+#define CONFIG_LOADADDR		500000	/* default location for tftp and bootm */
 
 #define CONFIG_BOOTDELAY	6	/* -1 disables auto-boot */
 #undef  CONFIG_BOOTARGS			/* the boot command will set bootargs */
@@ -718,7 +749,7 @@
 #define CONFIG_BAUDRATE	 115200
 
 #define CONFIG_PREBOOT	"echo;"	\
-	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 	"echo"
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
@@ -740,7 +771,7 @@
 	"load=tftp 100000 /tftpboot/mpc8349emds/u-boot.bin\0"		\
 	"update=protect off fe000000 fe03ffff; "			\
 		"era fe000000 fe03ffff; cp.b 100000 fe000000 ${filesize}\0"	\
-	"upd=run load;run update\0"					\
+	"upd=run load update\0"						\
 	"fdtaddr=400000\0"						\
 	"fdtfile=mpc8349emds.dtb\0"					\
 	""