X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2FMVBLM7.h;h=31c85e22de56c2a09435625cfdad8a224b076889;hb=cfeba45f505290ec719076dd174727d10045aa2b;hp=f8b016feed31c56ac6b9501ab543caa6ea2dc2a2;hpb=9e2032aa56a722af8959cd214cc1e54d59b2ba64;p=u-boot

diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h
index f8b016feed..31c85e22de 100644
--- a/include/configs/MVBLM7.h
+++ b/include/configs/MVBLM7.h
@@ -37,6 +37,8 @@
 #define CONFIG_MPC834x	1
 #define CONFIG_MPC8343	1
 
+#define	CONFIG_SYS_TEXT_BASE	0xFFF00000
+
 #define CONFIG_SYS_IMMR		0xE0000000
 
 #define CONFIG_PCI
@@ -116,15 +118,14 @@
 /*
  * U-Boot memory configuration
  */
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
 #undef	CONFIG_SYS_RAMBOOT
 
 #define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR	0xFD000000	/* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_END	0x1000		/* End of used area in RAM*/
+#define CONFIG_SYS_INIT_RAM_SIZE	0x1000		/* Size of used area in RAM*/
 
-#define CONFIG_SYS_GBL_DATA_SIZE	0x100		/* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
@@ -150,7 +151,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX	1
-#undef	CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
@@ -184,10 +184,9 @@
 #define CONFIG_SYS_PCI1_IO_PHYS	0xE2000000
 #define CONFIG_SYS_PCI1_IO_SIZE	0x01000000
 
-#define CONFIG_NET_MULTI	1
 #define CONFIG_NET_RETRY_COUNT	3
 
-#define PCI_66M
+#define CONFIG_PCI_66M
 #define CONFIG_83XX_CLKIN	66666667
 #define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
@@ -234,7 +233,11 @@
 #define CONFIG_BOOTP_SEND_HOSTNAME
 
 /* USB */
+#define CONFIG_SYS_USB_HOST
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_FSL
 #define CONFIG_HAS_FSL_DR_USB
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
 /*
  * Environment
@@ -267,6 +270,8 @@
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_FPGA
+#define CONFIG_CMD_USB
+#define CONFIG_DOS_PARTITION
 
 #undef CONFIG_WATCHDOG
 
@@ -275,6 +280,7 @@
  */
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE		/* add autocompletion support   */
 #define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 
@@ -293,10 +299,10 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(256 << 20)	/* Initial Memory map for Linux*/
 
 #define CONFIG_SYS_HRCW_LOW	0x0
 #define CONFIG_SYS_HRCW_HIGH	0x0
@@ -316,11 +322,12 @@
 #define CONFIG_SYS_SCCR_TSEC1CM	1
 #define CONFIG_SYS_SCCR_TSEC2CM	1
 
-#define CONFIG_SYS_SICRH	0x1fff8003
+#define CONFIG_SYS_SICRH	0x1fef0003
 #define CONFIG_SYS_SICRL	(SICRL_LDP_A | SICRL_USB1 | SICRL_USB0)
 
 #define CONFIG_SYS_HID0_INIT	0x000000000
-#define CONFIG_SYS_HID0_FINAL	CONFIG_SYS_HID0_INIT
+#define CONFIG_SYS_HID0_FINAL	(CONFIG_SYS_HID0_INIT | \
+				 HID0_ENABLE_INSTRUCTION_CACHE)
 
 #define CONFIG_SYS_HID2	HID2_HBE
 #define CONFIG_HIGH_BATS	1
@@ -371,15 +378,6 @@
 #define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02	/* Software reboot */
-
-
 /*
  * Environment Configuration
  */