X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2FP1022DS.h;h=5d572b45a3ecec63aa751e0df98a6b7ee59fa027;hb=bb6b142fc16713bb83e471912e614ac01eec4584;hp=093f2e4453d0c29ae97914e5dd9192b14d153d36;hpb=9e39003e7ffa327adaef468840196de2e8820d2f;p=u-boot

diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index 093f2e4453..5d572b45a3 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -13,10 +13,6 @@
 
 #define CONFIG_DISPLAY_BOARDINFO
 
-#ifdef CONFIG_36BIT
-#define CONFIG_PHYS_64BIT
-#endif
-
 #ifdef CONFIG_SDCARD
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
@@ -134,9 +130,9 @@
 
 #define CONFIG_FSL_ELBC			/* Has Enhanced localbus controller */
 #define CONFIG_PCI			/* Enable PCI/PCIE */
-#define CONFIG_PCIE1			/* PCIE controler 1 (slot 1) */
-#define CONFIG_PCIE2			/* PCIE controler 2 (slot 2) */
-#define CONFIG_PCIE3			/* PCIE controler 3 (ULI bridge) */
+#define CONFIG_PCIE1			/* PCIE controller 1 (slot 1) */
+#define CONFIG_PCIE2			/* PCIE controller 2 (slot 2) */
+#define CONFIG_PCIE3			/* PCIE controller 3 (ULI bridge) */
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_FSL_PCIE_RESET		/* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
@@ -172,7 +168,6 @@
 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 #endif
 
-
 /* DDR Setup */
 #define CONFIG_DDR_SPD
 #define CONFIG_VERY_BIG_RAM
@@ -217,7 +212,6 @@
 #define	CONFIG_SYS_DDR_ZQ_CONTROL	0x89080600
 #define CONFIG_SYS_DDR_WRLVL_CONTROL	0x8675f608
 
-
 /*
  * Memory map
  *
@@ -406,9 +400,6 @@
 #define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
 /* Video */
 
 #ifdef CONFIG_FSL_DIU_FB
@@ -443,17 +434,6 @@
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 #endif
 
-/*
- * Pass open firmware flat tree
- */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-/* new uImage format support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -477,12 +457,9 @@
 /*
  * eSPI - Enhanced SPI
  */
-#define CONFIG_SPI_FLASH_SPANSION
 
 #define CONFIG_HARD_SPI
-#define CONFIG_FSL_ESPI
 
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED		10000000
 #define CONFIG_SF_DEFAULT_MODE		0
 
@@ -571,20 +548,16 @@
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
 #endif
 
 #define CONFIG_MMC
 #ifdef CONFIG_MMC
-#define CONFIG_CMD_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_GENERIC_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #endif
 
 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
 
@@ -678,9 +651,6 @@
  */
 #define CONFIG_CMD_ERRATA
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
 #ifdef CONFIG_PCI
@@ -695,11 +665,9 @@
 #define CONFIG_USB_EHCI
 
 #ifdef CONFIG_USB_EHCI
-#define CONFIG_CMD_USB
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_USB_STORAGE
-#define CONFIG_CMD_FAT
 #endif
 #endif
 
@@ -743,7 +711,6 @@
 
 #define CONFIG_LOADADDR		1000000
 
-#define CONFIG_BOOTDELAY	10	/* -1 disables auto-boot */
 
 #define CONFIG_BAUDRATE	115200
 
@@ -760,7 +727,7 @@
 	"consoledev=ttyS0\0"					\
 	"ramdiskaddr=2000000\0"					\
 	"ramdiskfile=rootfs.ext2.gz.uboot\0"			\
-	"fdtaddr=c00000\0"	  			      	\
+	"fdtaddr=1e00000\0"	  			      	\
 	"fdtfile=p1022ds.dtb\0"	  				\
 	"bdev=sda3\0"		  			      	\
 	"hwconfig=esdhc;audclk:12\0"