X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2FP2020DS.h;h=df9ab34e80fbeee799eefa6e72d793f31aea6fd7;hb=b6535daefd65c93ea429bc4728062379dda6e482;hp=676f0134fcb65700574603b6a9139bc1aff26fcf;hpb=1f7fea4ebe62c8299064eccc02b39d4e636baf68;p=u-boot

diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index 676f0134fc..df9ab34e80 100644
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -27,6 +27,10 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#ifdef CONFIG_MK_36BIT
+#define CONFIG_PHYS_64BIT
+#endif
+
 /* High Level Configuration Options */
 #define CONFIG_BOOKE		1	/* BOOKE */
 #define CONFIG_E500		1	/* BOOKE e500 family */
@@ -34,7 +38,6 @@
 #define CONFIG_P2020		1
 #define CONFIG_P2020DS		1
 #define CONFIG_MP		1	/* support multiple processors */
-#define CONFIG_NUM_CPUS		2	/* Number of CPUs in the system */
 
 #define CONFIG_FSL_ELBC		1	/* Has Enhanced localbus controller */
 #define CONFIG_PCI		1	/* Enable PCI/PCIE */
@@ -51,13 +54,6 @@
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 
-/*
- * When initializing flash, if we cannot find the manufacturer ID,
- * assume this is the AMD flash associated with the CDS board.
- * This allows booting from a promjet.
- */
-#define CONFIG_ASSUME_AMD_FLASH
-
 #ifndef __ASSEMBLY__
 extern unsigned long calculate_board_sys_clk(unsigned long dummy);
 extern unsigned long calculate_board_ddr_clk(unsigned long dummy);
@@ -282,6 +278,11 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy);
 #define PIXIS_VWATCH		0x24	/* Watchdog Register */
 #define PIXIS_LED		0x25	/* LED Register */
 
+#define PIXIS_SW(x)		0x20 + (x - 1) * 2
+#define PIXIS_EN(x)		0x21 + (x - 1) * 2
+#define PIXIS_SW7_LBMAP		0xc0	/* SW7 - cfg_lbmap */
+#define PIXIS_SW7_VBANK		0x30	/* SW7 - cfg_vbank */
+
 /* old pixis referenced names */
 #define PIXIS_VCLKH		0x19	/* VELA VCLKH register */
 #define PIXIS_VCLKL		0x1A	/* VELA VCLKL register */
@@ -400,9 +401,6 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy);
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CONFIG_SYS_64BIT_VSPRINTF	1
-#define CONFIG_SYS_64BIT_STRTOUL	1
-
 /* new uImage format support */
 #define CONFIG_FIT		1
 #define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
@@ -412,7 +410,6 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy);
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
 #define CONFIG_SYS_I2C_SLAVE		0x7F
@@ -610,12 +607,20 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy);
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_BEDBUG
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_SCSI
 #define CONFIG_CMD_EXT2
 #endif
 
+/*
+ * USB
+ */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+
 #undef CONFIG_WATCHDOG			/* watchdog disabled */
 
 /*
@@ -637,10 +642,10 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy);
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 16 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(16 << 20)	/* Initial Memory map for Linux*/
 
 /*
  * Internal Definitions