X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2FPATI.h;h=e96fbc5aac9ad65747fb794bec902ea042208f33;hb=fc5d54b7fa3fa602e06e2f0863c0b134d6afca70;hp=bf39d0040e95ab0802241828a054e63b1a3e26a1;hpb=afd855d534de22aa625cb12aa9aa45e459f7de99;p=u-boot

diff --git a/include/configs/PATI.h b/include/configs/PATI.h
index bf39d0040e..e96fbc5aac 100644
--- a/include/configs/PATI.h
+++ b/include/configs/PATI.h
@@ -2,22 +2,7 @@
  * (C) Copyright 2003
  * Denis Peter d.peter@mpl.ch
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation,
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -42,7 +27,6 @@
 
 #define CONFIG_BAUDRATE		9600
 
-
 /*
  * BOOTP options
  */
@@ -51,32 +35,15 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_LOADB
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_SAVEENV
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_CONSOLE
-#define CONFIG_CMD_RUN
 #define CONFIG_CMD_BSP
-#define CONFIG_CMD_IMI
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MISC
-
 
-#if 0
-#define CONFIG_BOOTDELAY	-1		/* autoboot disabled			*/
-#else
-#define CONFIG_BOOTDELAY	5		/* autoboot after 5 seconds		*/
-#endif
 #define CONFIG_BOOTCOMMAND	""	/* autoboot command			*/
 
 #define CONFIG_BOOTARGS		""		/* */
@@ -94,7 +61,6 @@
 #define CONFIG_PREBOOT
 
 #define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
-#define	CONFIG_SYS_PROMPT		"pati=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
 #define	CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size	*/
 #else
@@ -109,10 +75,9 @@
 
 #define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address		*/
 
-#define	CONFIG_SYS_HZ			1000		/* Decrementer freq: 1 ms ticks	*/
-
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 1250000 }
 
+#define CONFIG_BOARD_EARLY_INIT_F
 
 /***********************************************************************
  * Last Stage Init
@@ -161,7 +126,6 @@
  */
 #define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux		*/
 
-
 /*-----------------------------------------------------------------------
  * FLASH organization
  *-----------------------------------------------------------------------
@@ -191,7 +155,6 @@
 #define CONFIG_ENV_OFFSET		((0 - CONFIG_SYS_FLASH_BASE) - CONFIG_ENV_SIZE)		/* Environment starts at this adress	*/
 #endif
 
-
 #define CONFIG_SPI		1
 #define CONFIG_SYS_SPI_CS_USED	0x09 /* CS0 and CS3 are used */
 #define CONFIG_SYS_SPI_CS_BASE	0x08 /* CS3 is active low */
@@ -250,7 +213,6 @@
  */
 #define CONFIG_SYS_OSC_CLK	((uint)4000000)		/* Oscillator clock is 4MHz	*/
 
-
 #define CONFIG_SYS_PLPRCR	(PLPRCR_MF_9 | PLPRCR_DIVF_0)
 
 /*-----------------------------------------------------------------------