X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2FPMC405DE.h;h=0b0db207da06d12c7798f1a44feb637ae0a8eef6;hb=275bd6d11fd686beddf68b9f2b0de015b9e9f631;hp=531e95612a23f3f490582f8fc8e87ba66e92abb4;hpb=326ea986ac150acdc7656d57fca647db80b50158;p=u-boot

diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h
index 531e95612a..0b0db207da 100644
--- a/include/configs/PMC405DE.h
+++ b/include/configs/PMC405DE.h
@@ -2,17 +2,17 @@
  * (C) Copyright 2009
  * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd.eu
  *
- * SPDX-License-Identifier:	GPL-2.0+ 
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
 #define CONFIG_405EP		1	/* This is a PPC405 CPU		*/
-#define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
 #define CONFIG_PMC405DE		1	/* ...on a PMC405DE board	*/
 
 #define	CONFIG_SYS_TEXT_BASE	0xFFFC0000
+#define CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/
 #define CONFIG_MISC_INIT_R	1	/* call misc_init_r()		*/
@@ -21,7 +21,6 @@
 #define CONFIG_SYS_CLK_FREQ	33330000 /* external frequency to pll	*/
 
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/
 
 #undef  CONFIG_BOOTARGS
 #undef  CONFIG_BOOTCOMMAND
@@ -53,23 +52,12 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_CHIP_CONFIG
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
 
 #undef  CONFIG_WATCHDOG			/* watchdog disabled */
 #define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0 */
@@ -79,7 +67,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT	"=> "	/* Monitor Command Prompt */
 
 #define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
@@ -93,7 +80,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x3000000 /* 1 ... 48 MB in DRAM */
 
 #define CONFIG_CONS_INDEX	2	/* Use UART1			*/
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
@@ -104,19 +90,8 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1	/* To use extended board_into (bd_t) */
 
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history     */
-#define CONFIG_LOOPW		1	/* enable loopw command         */
 #define CONFIG_MX_CYCLIC	1	/* enable mdc/mwc commands      */
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
-#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
-
-#define CONFIG_AUTOBOOT_KEYED	1
-#define CONFIG_AUTOBOOT_PROMPT	\
-	"Press SPACE to abort autoboot in %d seconds\n", bootdelay
-#undef CONFIG_AUTOBOOT_DELAY_STR
-#define CONFIG_AUTOBOOT_STOP_STR " "
 
 /*
  * PCI stuff
@@ -179,7 +154,6 @@
 #define CONFIG_SYS_FLASH_EMPTY_INFO	1 /* 'E' for empty sector (flinfo) */
 #define CONFIG_SYS_FLASH_QUIET_TEST	1 /* don't warn upon unknown flash */
 
-
 /*
  * Start addresses for the final memory configuration
  * (Set up by the startup code)