X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2FRattler.h;h=e8ed0951c8b992ee9a858f85a465b0326c576bc3;hb=0e7927db138976469e7257e29c1338050a50fcd9;hp=a55297096fae656b71bf05f053dca6b9fe742a97;hpb=d56019c0eed08632c2b1f828ca9e0b22d6151414;p=u-boot

diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h
index a55297096f..e8ed0951c8 100644
--- a/include/configs/Rattler.h
+++ b/include/configs/Rattler.h
@@ -37,8 +37,6 @@
 
 #define CONFIG_RATTLER			/* Analogue&Micro Rattler board */
 
-#undef DEBUG
-
 /* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
 #define CONFIG_ENV_OVERWRITE
 
@@ -62,8 +60,8 @@
  * SCC, 1-3 for FCC)
  *
  * If CONFIG_ETHER_NONE is defined, then either the ethernet routines
- * must be defined elsewhere (as for the console), or CFG_CMD_NET must
- * be removed from CONFIG_COMMANDS to remove support for networking.
+ * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
+ * must be unset.
  */
 #undef	CONFIG_ETHER_ON_SCC		/* Ethernet is not on SCC */
 #define CONFIG_ETHER_ON_FCC		/* Ethernet is on FCC     */
@@ -125,23 +123,33 @@
 
 #define CONFIG_BAUDRATE		38400
 
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL   \
-				| CFG_CMD_DHCP    \
-				| CFG_CMD_ECHO    \
-				| CFG_CMD_IMMAP   \
-				| CFG_CMD_JFFS2   \
-				| CFG_CMD_MII     \
-				| CFG_CMD_PING    \
-				)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
 
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
 #define CONFIG_BOOTCOMMAND	"bootm FE040000"	/* autoboot command */
 #define CONFIG_BOOTARGS		"root=/dev/mtdblock2 rw mtdparts=phys:1M(ROM)ro,-(root)"
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
 #define CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
 #undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
@@ -159,7 +167,7 @@
 #define CFG_PROMPT_HUSH_PS2	"> "
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
@@ -179,18 +187,34 @@
 
 #define CFG_FLASH_BASE		0xFE000000
 #define CFG_FLASH_CFI
-#define CFG_FLASH_CFI_DRIVER
+#define CONFIG_FLASH_CFI_DRIVER
 #define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks	*/
 #define CFG_MAX_FLASH_SECT	256	/* max num of sects on one chip */
 
 #define	CFG_DIRECT_FLASH_TFTP
 
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
-#define CFG_JFFS2_FIRST_BANK	0
+#if defined(CONFIG_CMD_JFFS2)
 #define CFG_JFFS2_NUM_BANKS	CFG_MAX_FLASH_BANKS
-#define CFG_JFFS2_FIRST_SECTOR  16
 #define CFG_JFFS2_SORT_FRAGMENTS
-#endif /* CFG_CMD_JFFS2 */
+
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00100000
+
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=rattler-0"
+#define MTDPARTS_DEFAULT	"mtdparts=rattler-0:-@1m(jffs2)"
+*/
+#endif /* CONFIG_CMD_JFFS2 */
 
 #define CFG_MONITOR_BASE	TEXT_BASE
 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
@@ -226,13 +250,13 @@
 /* Hard reset configuration word */
 #define CFG_HRCW_MASTER		0x0A06875A /* Not used - provided by FPGA */
 /* No slaves */
-#define CFG_HRCW_SLAVE1 	0
-#define CFG_HRCW_SLAVE2 	0
-#define CFG_HRCW_SLAVE3 	0
-#define CFG_HRCW_SLAVE4 	0
-#define CFG_HRCW_SLAVE5 	0
-#define CFG_HRCW_SLAVE6 	0
-#define CFG_HRCW_SLAVE7 	0
+#define CFG_HRCW_SLAVE1		0
+#define CFG_HRCW_SLAVE2		0
+#define CFG_HRCW_SLAVE3		0
+#define CFG_HRCW_SLAVE4		0
+#define CFG_HRCW_SLAVE5		0
+#define CFG_HRCW_SLAVE6		0
+#define CFG_HRCW_SLAVE7		0
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM		0x02	/* Software reboot                  */
@@ -241,7 +265,7 @@
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 #define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif