X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2FSBC8540.h;h=72559c0c023fb4491258fc796f3008e08939c862;hb=e1ccf97c5d7651664d37c0c5aa243874b8851b2d;hp=7cde39bf2a577852648b8ebcb62b0f5277349b34;hpb=5e498dfab87c5b9bd1ad7b9a35f38b9e5dcd2244;p=u-boot

diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index 7cde39bf2a..72559c0c02 100644
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -34,7 +34,7 @@
 /*
  * Top level Makefile configuration choices
  */
-#ifdef CONFIG_MK_66
+#ifdef CONFIG_66
 #define CONFIG_PCI_66
 #endif
 
@@ -48,6 +48,8 @@
 #define CONFIG_MPC85xx		1	/* MPC8540/MPC8560		*/
 #define CONFIG_MPC85xx_REV1	1	/* MPC85xx Rev 1.0 chip		*/
 
+#define	CONFIG_SYS_TEXT_BASE	0xfffc0000
+
 
 #define CONFIG_CPM2		1	/* has CPM2 */
 
@@ -116,7 +118,7 @@
 #undef  CONFIG_DDR_SPD
 
 #if defined(CONFIG_MPC85xx_REV1)
-  #define CONFIG_DDR_DLL			/* possible DLL fix needed	*/
+#define CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN	/* possible DLL fix needed */
 #endif
 
 #undef  CONFIG_DDR_ECC			    /* only for ECC DDR module */
@@ -191,10 +193,9 @@
 
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0x70000000	/* Initial RAM address	*/
-#define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_SIZE	0x4000		/* Size of used area in RAM */
 
-#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
@@ -205,7 +206,6 @@
 #undef	CONFIG_CONS_NONE			/* define if console on something else */
 
 #define CONFIG_CONS_INDEX     1
-#undef	CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
@@ -290,6 +290,10 @@
    * GPIO pins used for bit-banged MII communications
    */
   #define MDIO_PORT	2		/* Port C */
+  #define MDIO_DECLARE	volatile ioport_t *iop = ioport_addr ( \
+				(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
+  #define MDC_DECLARE	MDIO_DECLARE
+
   #define MDIO_ACTIVE	(iop->pdir |=  0x00400000)
   #define MDIO_TRISTATE	(iop->pdir &= ~0x00400000)
   #define MDIO_READ	((iop->pdat &  0x00400000) != 0)
@@ -321,7 +325,7 @@
 #define CONFIG_SYS_FLASH_ERASE_TOUT	200000		/* Timeout for Flash Erase (in ms)	*/
 #define CONFIG_SYS_FLASH_WRITE_TOUT	50000		/* Timeout for Flash Write (in ms)	*/
 
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor	*/
 
 #if 0
 /* XXX This doesn't work and I don't want to fix it */
@@ -376,6 +380,7 @@
 
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -416,14 +421,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
-
 #if defined(CONFIG_CMD_KGDB)
   #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
   #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */