X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2FT208xRDB.h;h=0ded41e0dd5229810d6dc6de755c8d08972fdcb5;hb=63865278dae47ad19527d9f9b6e0dad6cb01f401;hp=508c896d60be1b700e6c0b3903e5940f9776b954;hpb=cb04db155f4e7ccaec1b961d8a84e1a1b9524594;p=u-boot

diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index 508c896d60..0ded41e0dd 100644
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -500,10 +500,10 @@ unsigned long get_board_ddr_clk(void);
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
 #define CONFIG_PCI		/* Enable PCI/PCIE */
-#define CONFIG_PCIE1		/* PCIE controler 1 */
-#define CONFIG_PCIE2		/* PCIE controler 2 */
-#define CONFIG_PCIE3		/* PCIE controler 3 */
-#define CONFIG_PCIE4		/* PCIE controler 4 */
+#define CONFIG_PCIE1		/* PCIE controller 1 */
+#define CONFIG_PCIE2		/* PCIE controller 2 */
+#define CONFIG_PCIE3		/* PCIE controller 3 */
+#define CONFIG_PCIE4		/* PCIE controller 4 */
 #define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT	/* enable 64-bit PCI resources */
 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
@@ -674,7 +674,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
 #endif
 
 /*
@@ -684,7 +683,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_USB_STORAGE
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_CMD_EXT2
 #define CONFIG_HAS_FSL_DR_USB
 #endif
 
@@ -692,14 +690,11 @@ unsigned long get_board_ddr_clk(void);
  * SDHC
  */
 #ifdef CONFIG_MMC
-#define CONFIG_CMD_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
 
@@ -727,7 +722,6 @@ unsigned long get_board_ddr_clk(void);
  * Command line configuration.
  */
 #define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_REGINFO
 
 #ifdef CONFIG_PCI
@@ -779,7 +773,6 @@ unsigned long get_board_ddr_clk(void);
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR		1000000
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_BOOTDELAY	10	/* -1 disables auto-boot */
 #define __USB_PHY_TYPE		utmi
 
 #define	CONFIG_EXTRA_ENV_SETTINGS				\