X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2FTQM823L.h;h=a01b4a6befb8eba6f260f30fb7fc8e92455684b9;hb=962d026b6aaf7d801d182f3188e4bbc106e057e3;hp=87e5a650d223a4df5c146d1ce846a7b5733498a4;hpb=8206bfae3ab7f99965136384360ba2de0c6f4c3b;p=u-boot diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index 87e5a650d2..a01b4a6bef 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -36,6 +36,8 @@ #define CONFIG_MPC823 1 /* This is a MPC823 CPU */ #define CONFIG_TQM823L 1 /* ...on a TQM8xxL module */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #ifdef CONFIG_LCD /* with LCD controller ? */ #define CONFIG_LCD_LOGO 1 /* print our logo on the LCD */ #define CONFIG_LCD_INFO 1 /* ... and some board info */ @@ -43,8 +45,8 @@ #endif #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE +#define CONFIG_SYS_SMC_RXBUFLEN 128 +#define CONFIG_SYS_MAXIDLE 10 #define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ #define CONFIG_BOOTCOUNT_LIMIT @@ -144,9 +146,6 @@ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#endif #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -164,8 +163,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) @@ -180,9 +177,8 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- @@ -232,6 +228,8 @@ * Dynamic MTD partition support */ #define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_FLASH_CFI_MTD #define MTDIDS_DEFAULT "nor0=TQM8xxL-0" #define MTDPARTS_DEFAULT "mtdparts=TQM8xxL-0:256k(u-boot)," \ @@ -479,13 +477,9 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* - * Internal Definitions - * - * Boot Flags - */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_HWCONFIG 1 #endif /* __CONFIG_H */