X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2FTQM834x.h;h=2aac682a2c8c44cff25372f54d9c58048db12f54;hb=89cb2b5f8be4f6d04bd87220aa8f72eb0850edc4;hp=fc254256a0eda5f4ef0491a08491434441641b44;hpb=d44a5f51288aec60c6bdb4ac939d75c24e5bf9c2;p=u-boot

diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index fc254256a0..2aac682a2c 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -12,11 +12,12 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_DISPLAY_BOARDINFO
+
 /*
  * High Level Configuration Options
  */
 #define CONFIG_E300		1	/* E300 Family */
-#define CONFIG_MPC83xx		1	/* MPC83xx family */
 #define CONFIG_MPC834x		1	/* MPC834x specific */
 #define CONFIG_MPC8349		1	/* MPC8349 specific */
 #define CONFIG_TQM834X		1	/* TQM834X board specific */
@@ -157,7 +158,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX	1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
@@ -182,7 +182,6 @@
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2	/* 16 bit */
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5	/* 32 bytes/write */
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	12	/* 10ms +/- 20% */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS		/* more than one eeprom */
 
 /* I2C RTC */
 #define CONFIG_RTC_DS1337			/* use ds1337 rtc via i2c */
@@ -283,34 +282,19 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_DTT
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SNTP
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
 #endif
 
-#if defined(CONFIG_SYS_RAMBOOT)
-    #undef CONFIG_CMD_SAVEENV
-    #undef CONFIG_CMD_LOADS
-#endif
-
 /*
  * Miscellaneous configurable options
  */
@@ -320,8 +304,6 @@
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history */
 #define CONFIG_AUTO_COMPLETE		/* add autocompletion support */
 
-#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser */
-
 #if defined(CONFIG_CMD_KGDB)
 	#define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
 #else
@@ -336,11 +318,6 @@
 
 #undef CONFIG_WATCHDOG		/* watchdog disabled */
 
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-#define CONFIG_OF_STDOUT_VIA_ALIAS	1
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is
@@ -495,7 +472,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*