X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fadp-ag101p.h;h=24904b0b7c3c39507ce146ab401edf2256f74174;hb=c534d2fdcf7aa80230a0f1ed54d5e3164ba595eb;hp=e761362ee10a1e32e7008bef77a3951a254b1b8a;hpb=c2120fbfbc4d1f6953228f86be8bdbf38bacfdab;p=u-boot

diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h
index e761362ee1..24904b0b7c 100644
--- a/include/configs/adp-ag101p.h
+++ b/include/configs/adp-ag101p.h
@@ -20,6 +20,13 @@
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
+/*
+ * Definitions related to passing arguments to kernel.
+ */
+#define CONFIG_CMDLINE_TAG			/* send commandline to Kernel */
+#define CONFIG_SETUP_MEMORY_TAGS	/* send memory definition to kernel */
+#define CONFIG_INITRD_TAG			/* send initrd params */
+
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_MEM_REMAP
 #endif
@@ -33,12 +40,6 @@
 /*
  * Timer
  */
-
-/*
- * According to the discussion in u-boot mailing list before,
- * CONFIG_SYS_HZ at 1000 is mandatory.
- */
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_SYS_CLK_FREQ	39062500
 #define VERSION_CLOCK		CONFIG_SYS_CLK_FREQ
 
@@ -101,7 +102,9 @@
 #define CONFIG_DOS_PARTITION
 #define CONFIG_FTSDC010
 #define CONFIG_FTSDC010_NUMBER		1
+#define CONFIG_FTSDC010_SDIO
 #define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
 
 /*
  * Command line configuration.
@@ -135,11 +138,6 @@
 /* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */
 #define CONFIG_SYS_MALLOC_LEN		(512 << 10)
 
-/*
- * size in bytes reserved for initial data
- */
-#define CONFIG_SYS_GBL_DATA_SIZE	128
-
 /*
  * AHB Controller configuration
  */
@@ -221,6 +219,10 @@
 #define CONFIG_SYS_FTSDMC021_BANK0_BSR	(FTSDMC021_BANK_ENABLE	 |	\
 					 CONFIG_SYS_FTSDMC021_BANK0_BASE)
 
+#define CONFIG_SYS_FTSDMC021_BANK1_BASE	\
+	(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE + (PHYS_SDRAM_0_SIZE >> 20))
+#define CONFIG_SYS_FTSDMC021_BANK1_BSR	(FTSDMC021_BANK_ENABLE	 |	\
+					 CONFIG_SYS_FTSDMC021_BANK1_BASE)
 #endif
 
 /*
@@ -234,9 +236,12 @@
 #else	/* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_MEM_REMAP */
 #define PHYS_SDRAM_0		0x10000000	/* SDRAM Bank #1 */
 #endif
+#define PHYS_SDRAM_1 \
+	(PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)	/* SDRAM Bank #2 */
 
-#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
+#define CONFIG_NR_DRAM_BANKS	2		/* we have 2 bank of DRAM */
 #define PHYS_SDRAM_0_SIZE	0x04000000	/* 64 MB */
+#define PHYS_SDRAM_1_SIZE	0x04000000	/* 64 MB */
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_0