X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fastro_mcf5373l.h;h=828bc601aa944404b27467b4f469f62755322c6a;hb=44da3a176c5bd48b7ed257454e3e551c956adb30;hp=f641959cc112775aaeaaa40d045a32cb516ed775;hpb=00f792e0df9ae942427e44595a0f4379582accee;p=u-boot

diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h
index f641959cc1..828bc601aa 100644
--- a/include/configs/astro_mcf5373l.h
+++ b/include/configs/astro_mcf5373l.h
@@ -3,23 +3,7 @@
  *
  * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -55,21 +39,9 @@
 #error No card type defined!
 #endif
 
-/*
- * Define processor
- * possible values for Urmel board: only Coldfire M5373 processor supported
- * (please do not change)
- */
-
-/* it seems not clear yet which processor defines we should use */
-#define CONFIG_MCF537x			/* define processor family */
-#define CONFIG_MCF532x			/* define processor family */
-#define CONFIG_M5373			/* define processor type */
 #define CONFIG_ASTRO5373L		/* define board type */
 
 /* Command line configuration */
-#include <config_cmd_default.h>
-
 /*
  * CONFIG_RAM defines if u-boot is loaded via BDM (or started from
  * a different bootloader that has already performed RAM setup) or
@@ -85,25 +57,16 @@
 #define ENABLE_JFFS	1
 #endif
 
-/* Define which commmands should be available at u-boot command prompt */
+/* Define which commands should be available at u-boot command prompt */
 
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_FLASH
 #define CONFIG_CMD_I2C
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
-#define CONFIG_CMD_XIMG
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
 #if ENABLE_JFFS
 #define CONFIG_CMD_JFFS2
 #endif
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_FPGA
+#define CONFIG_CMD_FPGA_LOADMK
 #define CONFIG_CMDLINE_EDITING
 
 #define CONFIG_SYS_HUSH_PARSER
@@ -126,10 +89,8 @@
 /*
  * Defines processor clock - important for correct timings concerning serial
  * interface etc.
- * CONFIG_SYS_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms
  */
 
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CLK			80000000
 #define CONFIG_SYS_CPU_CLK		(CONFIG_SYS_CLK * 3)
 #define CONFIG_SYS_SDRAM_SIZE		32		/* SDRAM size in MB */
@@ -245,8 +206,6 @@
 #define CONFIG_BOOTARGS		" console=ttyS2,115200 rootfstype=romfs"\
 				" loaderversion=$loaderversion"
 
-#define CONFIG_SYS_PROMPT	"URMEL > "
-
 /* default RAM address for user programs */
 #define CONFIG_SYS_LOAD_ADDR	0x20000
 
@@ -370,6 +329,10 @@
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
 #define CONFIG_SYS_FLASH_CFI_NONBLOCK	1
 
+#define LDS_BOARD_TEXT \
+	. = DEFINED(env_offset) ? env_offset : .; \
+	common/env_embedded.o       (.text*)
+
 #if ENABLE_JFFS
 /* JFFS Partition offset set */
 #define CONFIG_SYS_JFFS2_FIRST_BANK    0