X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91rm9200ek.h;h=810023a49449b2203b1c0ff1cc0119f0be7f7963;hb=7b89795f17c990263a17ecf25e447df16e379748;hp=6b2dd63b47dcbb7673c396eec7a3878468d2dc22;hpb=99fa97e955f642deedb9f2de38e0215a8b3a40ac;p=u-boot

diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h
index 6b2dd63b47..810023a494 100644
--- a/include/configs/at91rm9200ek.h
+++ b/include/configs/at91rm9200ek.h
@@ -32,6 +32,20 @@
 
 #include <asm/sizes.h>
 
+/*
+ * set some initial configurations depending on configure target
+ *
+ * at91rm9200ek_config     -> boot from 0x0 in NOR Flash at CS0
+ * at91rm9200ek_ram_config -> continue booting from 0x20100000 in RAM; lowlevel
+ *                            initialisation was done by some preloader
+ */
+#ifdef CONFIG_RAMBOOT
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_TEXT_BASE 0x20100000
+#else
+#define CONFIG_SYS_TEXT_BASE 0x10000000
+#endif
+
 /*
  * AT91C_XTAL_CLOCK is the frequency of external xtal in hertz
  * AT91C_MAIN_CLOCK is the frequency of PLLA output
@@ -57,6 +71,8 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 
+#define CONFIG_AT91FAMILY
+
 /*
  * Memory Configuration
  */
@@ -90,7 +106,7 @@
 #define CONFIG_SYS_EBI_CSA_VAL	0x00000002 /* CS1=CONFIG_SYS_SDRAM */
 #define CONFIG_SYS_SDRC_CR_VAL	0x2188c155 /* set up the CONFIG_SYS_SDRAM */
 #define CONFIG_SYS_SDRAM	CONFIG_SYS_SDRAM_BASE /* address of the SDRAM */
-#define CONFIG_SYS_SDRAM1	CONFIG_SYS_SDRAM_BASE /* address of the SDRAM */
+#define CONFIG_SYS_SDRAM1	(CONFIG_SYS_SDRAM_BASE+0x80)
 #define CONFIG_SYS_SDRAM_VAL	0x00000000 /* value written to CONFIG_SYS_SDRAM */
 #define CONFIG_SYS_SDRC_MR_VAL	0x00000002 /* Precharge All */
 #define CONFIG_SYS_SDRC_MR_VAL1	0x00000004 /* refresh */
@@ -122,6 +138,7 @@
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
 #undef CONFIG_CMD_FPGA
 
 /*
@@ -145,6 +162,20 @@
 #define CONFIG_SYS_MAX_FLASH_SECT	256
 #define CONFIG_SYS_FLASH_PROTECTION
 
+/*
+ * USB Config
+ */
+#define CONFIG_USB_ATMEL			1
+#define CONFIG_USB_OHCI_NEW			1
+#define CONFIG_USB_KEYBOARD			1
+#define CONFIG_USB_STORAGE			1
+#define CONFIG_DOS_PARTITION			1
+
+#define CONFIG_SYS_USB_OHCI_CPU_INIT		1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		AT91_USB_HOST_BASE
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91rm9200"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	15
+
 /*
  * Environment Settings
  */
@@ -190,10 +221,9 @@
 #define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + SZ_128K, \
 					     SZ_4K)
 /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	128
 
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + SZ_4K \
-					- CONFIG_SYS_GBL_DATA_SIZE)
+					- GENERATED_GBL_DATA_SIZE)
 
 #define CONFIG_STACKSIZE		SZ_32K	/* regular stack */
 #define CONFIG_STACKSIZE_IRQ		SZ_4K	/* Unsure if to big or to small*/