X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fatngw100.h;h=a0f451b1a057c5e6536e7ac6b6e6495ee7b8f1a4;hb=89ca873e2ddea859526f25f678fa53dda055e90f;hp=c87e4147cd26e436704fa9d3fb95f041d140912d;hpb=8b485ba12b0defa0c4ed3559789250238f8331a8;p=u-boot

diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
index c87e4147cd..a0f451b1a0 100644
--- a/include/configs/atngw100.h
+++ b/include/configs/atngw100.h
@@ -10,12 +10,12 @@
 
 #include <asm/arch/hardware.h>
 
-#define CONFIG_AVR32
 #define CONFIG_AT32AP
 #define CONFIG_AT32AP7000
 #define CONFIG_ATNGW100
 
-#define CONFIG_SYS_HZ				1000
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_R
 
 /*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
@@ -62,17 +62,6 @@
 #define CONFIG_BOOTCOMMAND						\
 	"fsload; bootm"
 
-/*
- * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
- * data on the serial line may interrupt the boot sequence.
- */
-#define CONFIG_BOOTDELAY		1
-#define CONFIG_AUTOBOOT
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT		\
-	"Press SPACE to abort autoboot in %d seconds\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR	"d"
-#define CONFIG_AUTOBOOT_STOP_STR	" "
 
 /*
  * After booting the board for the first time, new ethernet addresses
@@ -90,21 +79,7 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_SETGETDCR
-#undef CONFIG_CMD_SOURCE
-#undef CONFIG_CMD_XIMG
 
 #define CONFIG_ATMEL_USART
 #define CONFIG_MACB
@@ -116,9 +91,6 @@
 #define CONFIG_GENERIC_MMC
 #define CONFIG_ATMEL_SPI
 
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_ATMEL
-
 #define CONFIG_SYS_DCACHE_LINESZ		32
 #define CONFIG_SYS_ICACHE_LINESZ		32
 
@@ -146,14 +118,12 @@
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
 
 #define CONFIG_SYS_MALLOC_LEN			(256*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN		(16384)
 
 /* Allow 4MB for the kernel run-time image */
 #define CONFIG_SYS_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
 #define CONFIG_SYS_BOOTPARAMS_LEN		(16 * 1024)
 
 /* Other configuration settings that shouldn't have to change all that often */
-#define CONFIG_SYS_PROMPT			"U-Boot> "
 #define CONFIG_SYS_CBSIZE			256
 #define CONFIG_SYS_MAXARGS			16
 #define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)