X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fatngw100mkii.h;h=4d9282a7bf86ecf414833b326b94074713d1bd29;hb=9f03247edc7761b608db31104821b4518a70e691;hp=998cb97a5594144627d566a37a38f160f09e3261;hpb=60607c9de01afb53cb284cede3481d0167fc9df0;p=u-boot diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h index 998cb97a55..4d9282a7bf 100644 --- a/include/configs/atngw100mkii.h +++ b/include/configs/atngw100mkii.h @@ -1,43 +1,23 @@ /* * Copyright (C) 2006 Atmel Corporation * - * Copyright (C) 2012 Andreas Bießmann + * Copyright (C) 2012 Andreas Bießmann * * Configuration settings for the AVR32 Network Gateway * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H #define __CONFIG_H #include -#define CONFIG_AVR32 #define CONFIG_AT32AP #define CONFIG_AT32AP7000 #define CONFIG_ATNGW100MKII -/* - * Timer clock frequency. We're using the CPU-internal COUNT register - * for this, so this is equivalent to the CPU core clock frequency - */ -#define CONFIG_SYS_HZ 1000 +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R /* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL @@ -101,17 +81,6 @@ #define CONFIG_BOOTCOMMAND \ "fsload 0x10400000 /uImage; bootm" -/* - * Only interrupt autoboot if is pressed. Otherwise, garbage - * data on the serial line may interrupt the boot sequence. - */ -#define CONFIG_BOOTDELAY 1 -#define CONFIG_AUTOBOOT -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT \ - "Press SPACE to abort autoboot in %d seconds\n", bootdelay -#define CONFIG_AUTOBOOT_DELAY_STR "d" -#define CONFIG_AUTOBOOT_STOP_STR " " /* * After booting the board for the first time, new ethernet addresses @@ -119,7 +88,6 @@ * "ethaddr" and "eth1addr". This is normally done during production. */ #define CONFIG_OVERWRITE_ETHADDR_ONCE -#define CONFIG_NET_MULTI /* * BOOTP/DHCP options @@ -130,21 +98,7 @@ /* * Command line configuration. */ -#include - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MMC -#define CONFIG_CMD_SF -#define CONFIG_CMD_SPI -#define CONFIG_CMD_MII - -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_SETGETDCR -#undef CONFIG_CMD_XIMG #define CONFIG_ATMEL_USART #define CONFIG_MACB @@ -156,9 +110,6 @@ #define CONFIG_GENERIC_MMC #define CONFIG_ATMEL_SPI -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_ATMEL - #define CONFIG_SYS_DCACHE_LINESZ 32 #define CONFIG_SYS_ICACHE_LINESZ 32 @@ -174,6 +125,7 @@ #define CONFIG_SYS_MAX_FLASH_SECT 135 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_TEXT_BASE 0x00000000 #define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE #define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE @@ -186,14 +138,12 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE) #define CONFIG_SYS_MALLOC_LEN (256*1024) -#define CONFIG_SYS_DMA_ALLOC_LEN (16384) /* Allow 4MB for the kernel run-time image */ #define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) #define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024) /* Other configuration settings that shouldn't have to change all that often */ -#define CONFIG_SYS_PROMPT "U-Boot> " #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)