X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fatstk1002.h;h=b33e26fe011727d7fbc9ff38c8d913565223bf8f;hb=8b6684a698500be9c142ec2c9f46cfc348e17f0c;hp=e1d8f74c5ec9334f9e0ac71ecdf9a6999cbbc85f;hpb=2fd90ce575b02d189cbf443c85309bcd001aa393;p=u-boot

diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index e1d8f74c5e..b33e26fe01 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -39,8 +39,10 @@
 #define CFG_HZ				1000
 
 /*
- * Set up the PLL to run at 199.5 MHz, the CPU to run at 1/2 the PLL
- * frequency and the peripherals to run at 1/4 the PLL frequency.
+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
+ * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
+ * PLL frequency.
+ * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
  */
 #define CONFIG_PLL			1
 #define CFG_POWER_MANAGER		1
@@ -48,9 +50,25 @@
 #define CFG_PLL0_DIV			1
 #define CFG_PLL0_MUL			7
 #define CFG_PLL0_SUPPRESS_CYCLES	16
+/*
+ * Set the CPU running at:
+ * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
+ */
 #define CFG_CLKDIV_CPU			0
+/*
+ * Set the HSB running at:
+ * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
+ */
 #define CFG_CLKDIV_HSB			1
+/*
+ * Set the PBA running at:
+ * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
+ */
 #define CFG_CLKDIV_PBA			2
+/*
+ * Set the PBB running at:
+ * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
+ */
 #define CFG_CLKDIV_PBB			1
 
 /*
@@ -78,7 +96,7 @@
 
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_BOOTARGS							\
-	"console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2 fbmem=600k"
+	"console=ttyS0 root=/dev/mmcblk0p1 fbmem=600k rootwait=1"
 
 #define CONFIG_BOOTCOMMAND						\
 	"fsload; bootm $(fileaddr)"
@@ -87,7 +105,7 @@
  * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
  * data on the serial line may interrupt the boot sequence.
  */
-#define CONFIG_BOOTDELAY		2
+#define CONFIG_BOOTDELAY		1
 #define CONFIG_AUTOBOOT			1
 #define CONFIG_AUTOBOOT_KEYED		1
 #define CONFIG_AUTOBOOT_PROMPT				\
@@ -96,15 +114,10 @@
 #define CONFIG_AUTOBOOT_STOP_STR	" "
 
 /*
- * These are "locally administered ethernet addresses" generated by
- * ./tools/gen_eth_addr
- *
- * After booting the board for the first time, new addresses should be
- * generated and assigned to the environment variables "ethaddr" and
- * "eth1addr".
+ * After booting the board for the first time, new ethernet addresses
+ * should be generated and assigned to the environment variables
+ * "ethaddr" and "eth1addr". This is normally done during production.
  */
-#define CONFIG_ETHADDR			"6a:87:71:14:cd:cb"
-#define CONFIG_ETH1ADDR			"ca:f8:15:e6:3e:e6"
 #define CONFIG_OVERWRITE_ETHADDR_ONCE	1
 #define CONFIG_NET_MULTI		1
 
@@ -182,13 +195,8 @@
 #define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
 #define CFG_LONGHELP			1
 
-#define CFG_MEMTEST_START						\
-	({ DECLARE_GLOBAL_DATA_PTR; gd->bd->bi_dram[0].start; })
-#define CFG_MEMTEST_END							\
-	({								\
-		DECLARE_GLOBAL_DATA_PTR;				\
-		gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size;	\
-	})
+#define CFG_MEMTEST_START		CFG_SDRAM_BASE
+#define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x700000)
 #define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
 
 #endif /* __CONFIG_H */