X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fbct-brettl2.h;h=d0828d5f5c107b9bb1aa943f45f80706e333c20a;hb=d977d6f71ed2613c716c140ed718806fec5bae4a;hp=09691d37377410b04f739cb039053471452e8b52;hpb=063993299f65146b31bdf82e3628b0c4b0d3bd20;p=u-boot

diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h
index 09691d3737..d0828d5f5c 100644
--- a/include/configs/bct-brettl2.h
+++ b/include/configs/bct-brettl2.h
@@ -11,6 +11,7 @@
 /*
  * Processor Settings
  */
+#define CONFIG_BFIN_CPU             bf536-0.3
 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
 
 
@@ -21,11 +22,11 @@
  */
 /* CONFIG_CLKIN_HZ is any value in Hz					*/
 #define CONFIG_CLKIN_HZ			16384000
-/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
-/*                                                1 = CLKIN / 2		*/
+/* CLKIN_HALF controls the DF bit in PLL_CTL	  0 = CLKIN		*/
+/*						  1 = CLKIN / 2		*/
 #define CONFIG_CLKIN_HALF		0
 /* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass	*/
-/*                                                1 = bypass PLL	*/
+/*						  1 = bypass PLL	*/
 #define CONFIG_PLL_BYPASS		0
 /* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
 /* Values can range from 0-63 (where 0 means 64)			*/
@@ -36,7 +37,7 @@
 /* SCLK_DIV controls the system clock divider				*/
 /* Values can range from 1-15						*/
 #define CONFIG_SCLK_DIV			3
-#define CONFIG_VR_CTL_VAL       (VLEV_110 | GAIN_20 | FREQ_1000)
+#define CONFIG_VR_CTL_VAL	(VLEV_110 | GAIN_20 | FREQ_1000)
 
 
 /*
@@ -67,14 +68,14 @@
 #define ADI_CMDS_NETWORK	1
 #define CONFIG_BFIN_MAC		1
 #define CONFIG_NETCONSOLE	1
-#define CONFIG_NET_MULTI	1
 #define CONFIG_HOSTNAME		brettl2
 #define CONFIG_IPADDR		192.168.233.224
 #define CONFIG_GATEWAYIP	192.168.233.1
 #define CONFIG_SERVERIP		192.168.233.53
-#define CONFIG_ROOTPATH		/romfs/brettl2
+#define CONFIG_ROOTPATH		"/romfs/brettl2"
 /* Uncomment next line to use fixed MAC address */
 /* #define CONFIG_ETHADDR	02:80:ad:20:31:e8 */
+#define CONFIG_LIB_RAND
 #endif
 
 
@@ -111,13 +112,10 @@
  * it linked after the configuration sector.
  */
 # define LDS_BOARD_TEXT \
-        arch/blackfin/cpu/traps.o            (.text .text.*); \
-        arch/blackfin/cpu/interrupt.o        (.text .text.*); \
-        arch/blackfin/cpu/serial.o           (.text .text.*); \
-        common/dlmalloc.o               (.text .text.*); \
-        lib/crc32.o             (.text .text.*); \
-        . = DEFINED(env_offset) ? env_offset : .; \
-        common/env_embedded.o           (.text .text.*);
+	arch/blackfin/lib/built-in.o (.text*); \
+	arch/blackfin/cpu/built-in.o (.text*); \
+	. = DEFINED(env_offset) ? env_offset : .; \
+	common/env_embedded.o (.text*);
 #endif
 
 
@@ -139,8 +137,6 @@
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
 
 /*
  * Pull in common ADI header for remaining command/environment setup