X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fbf527-ad7160-eval.h;h=258115a69e7744d7dc9062ddac6de90c46275c41;hb=744368d6ae3ea5cf73407c24d8e44b2a83b7f659;hp=889bfde2c4dea0c462e2493ac49a112479350855;hpb=fbcf8e8c753d1afa8a22b9e8d66bafe8b4a05f18;p=u-boot

diff --git a/include/configs/bf527-ad7160-eval.h b/include/configs/bf527-ad7160-eval.h
index 889bfde2c4..258115a69e 100644
--- a/include/configs/bf527-ad7160-eval.h
+++ b/include/configs/bf527-ad7160-eval.h
@@ -1,5 +1,5 @@
 /*
- * U-boot - Configuration file for BF527 AD7160-EVAL board
+ * U-Boot - Configuration file for BF527 AD7160-EVAL board
  */
 
 #ifndef __CONFIG_BF527_AD7160_EVAL_H__
@@ -7,14 +7,12 @@
 
 #include <asm/config-pre.h>
 
-
 /*
  * Processor Settings
  */
 #define CONFIG_BFIN_CPU             bf527-0.2
 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_SPI_MASTER
 
-
 /*
  * Clock Settings
  *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
@@ -38,7 +36,6 @@
 /* Values can range from 1-15						*/
 #define CONFIG_SCLK_DIV			5
 
-
 /*
  * Memory Settings
  */
@@ -55,7 +52,6 @@
 #define CONFIG_SYS_MONITOR_LEN	(768 * 1024)
 #define CONFIG_SYS_MALLOC_LEN	(640 * 1024)
 
-
 /*
  * NAND Settings
  * (can't be used same time as ethernet)
@@ -69,10 +65,8 @@
 #define CONFIG_DRIVER_NAND_BFIN
 #define CONFIG_SYS_NAND_BASE		0 /* not actually used */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define NAND_MAX_CHIPS		1
 #endif
 
-
 /*
  * Flash Settings
  */
@@ -83,16 +77,12 @@
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_MAX_FLASH_SECT	259
 
-
 /*
  * SPI Settings
  */
 #define CONFIG_BFIN_SPI
 #define CONFIG_ENV_SPI_MAX_HZ	30000000
 #define CONFIG_SF_DEFAULT_SPEED	30000000
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
-
 
 /*
  * Env Storage Settings
@@ -116,22 +106,18 @@
 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 #endif
 
-
 /*
  * I2C Settings
  */
-#define CONFIG_BFIN_TWI_I2C	1
-#define CONFIG_HARD_I2C		1
-
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
 
 /*
  * SPI_MMC Settings
  */
 #define CONFIG_MMC
-#define CONFIG_CMD_EXT2
-#define CONFIG_SPI_MMC
-#define CONFIG_SPI_MMC_DEFAULT_CS (MAX_CTRL_CS + GPIO_PH3)
-
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC_SPI
 
 /*
  * Misc Settings
@@ -139,7 +125,6 @@
 #define CONFIG_MISC_INIT_R
 #define CONFIG_UART_CONSOLE	0
 
-
 /*
  * Pull in common ADI header for remaining command/environment setup
  */