X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fbf537-pnav.h;h=4f2b2cbf296a8fe25e124caa99f2de4fec07b63c;hb=ad970756208864de4b353b77bfb04c0fb4fc5ab5;hp=11baec8a8f2d0d736ed8a20b9c837d9bce1c8e28;hpb=cb4b5e874f3c9b882a6f4394bbebbbd91fd01bbf;p=u-boot

diff --git a/include/configs/bf537-pnav.h b/include/configs/bf537-pnav.h
index 11baec8a8f..4f2b2cbf29 100644
--- a/include/configs/bf537-pnav.h
+++ b/include/configs/bf537-pnav.h
@@ -5,7 +5,7 @@
 #ifndef __CONFIG_BF537_PNAV_H__
 #define __CONFIG_BF537_PNAV_H__
 
-#include <asm/blackfin-config-pre.h>
+#include <asm/config-pre.h>
 
 
 /*
@@ -52,7 +52,7 @@
 #define CONFIG_EBIU_AMBCTL0_VAL	0x7BB033B0
 #define CONFIG_EBIU_AMBCTL1_VAL	0xFFC27BB0
 
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
 #define CONFIG_SYS_MALLOC_LEN		(128 * 1024)
 
 
@@ -63,12 +63,11 @@
 #define ADI_CMDS_NETWORK	1
 #define CONFIG_BFIN_MAC
 #define CONFIG_RMII
-#define CONFIG_NET_MULTI	1
 #endif
 #define CONFIG_HOSTNAME		bf537-pnav
 /* Uncomment next line to use fixed MAC address */
 /* #define CONFIG_ETHADDR	02:80:ad:24:21:18 */
-
+#define CONFIG_LIB_RAND
 
 /*
  * Flash Settings
@@ -85,7 +84,7 @@
  */
 #define CONFIG_BFIN_SPI
 #define CONFIG_ENV_SPI_MAX_HZ	30000000
-#define CONFIG_SF_DEFAULT_HZ	30000000
+#define CONFIG_SF_DEFAULT_SPEED	30000000
 #define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_STMICRO
 
@@ -94,7 +93,7 @@
  * Env Storage Settings
  */
 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
-#define ENV_IS_EMBEDDED_CUSTOM
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 #define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_OFFSET	0x4000
 #else
@@ -105,6 +104,18 @@
 #endif
 #define CONFIG_ENV_SIZE		0x1000
 #define CONFIG_ENV_SECT_SIZE	0x2000
+#ifdef ENV_IS_EMBEDDED
+/* WARNING - the following is hand-optimized to fit within
+ * the sector before the environment sector. If it throws
+ * an error during compilation remove an object here to get
+ * it linked after the configuration sector.
+ */
+# define LDS_BOARD_TEXT \
+	arch/blackfin/lib/built-in.o (.text*); \
+	arch/blackfin/cpu/built-in.o (.text*); \
+	. = DEFINED(env_offset) ? env_offset : .; \
+	common/env_embedded.o (.text*);
+#endif
 
 
 /*
@@ -117,7 +128,6 @@
 
 #define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2))
 #define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1))
-#define BFIN_NAND_READY     PF12
 #define BFIN_NAND_WRITE(addr, cmd) \
 	do { \
 		bfin_write8(addr, cmd); \
@@ -126,22 +136,14 @@
 
 #define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
 #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
-#define NAND_PLAT_DEV_READY(chip)      (bfin_read_PORTHIO() & BFIN_NAND_READY)
-#define NAND_PLAT_INIT() \
-	do { \
-		bfin_write_PORTH_FER(bfin_read_PORTH_FER() & ~BFIN_NAND_READY); \
-		bfin_write_PORTHIO_DIR(bfin_read_PORTHIO_DIR() & ~BFIN_NAND_READY); \
-		bfin_write_PORTHIO_INEN(bfin_read_PORTHIO_INEN() | BFIN_NAND_READY); \
-	} while (0)
+#define NAND_PLAT_GPIO_DEV_READY       GPIO_PF12
 
 
 /*
  * I2C settings
  */
-#define CONFIG_BFIN_TWI_I2C	1
-#define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_SPEED		50000
-#define CONFIG_SYS_I2C_SLAVE		0
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
 
 
 /*
@@ -167,6 +169,4 @@
  */
 #include <configs/bfin_adi_common.h>
 
-#include <asm/blackfin-config-post.h>
-
 #endif