X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fbf537-stamp.h;h=22d31508eb98a380b738fdf8ad47a31ff2b8ddb9;hb=bfe8fe87bac5ad5b63aa64167c5fe719c3c300cd;hp=98300db7b52b826c6dbcf32ba5ccaac6631a08b8;hpb=c3ae126c2cad03f04be36c92dd9437b9ee2385b6;p=u-boot

diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index 98300db7b5..22d31508eb 100644
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -11,7 +11,6 @@
 /*
  * Processor Settings
  */
-#define CONFIG_BFIN_CPU             bf537-0.2
 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
 
 
@@ -89,10 +88,7 @@
 #define CONFIG_ENV_SPI_MAX_HZ	30000000
 #define CONFIG_SF_DEFAULT_SPEED	30000000
 #define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_ATMEL
-#define CONFIG_SPI_FLASH_SPANSION
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SPI_FLASH_ALL
 
 
 /*
@@ -113,7 +109,7 @@
 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
 #define ENV_IS_EMBEDDED
 #else
-#define ENV_IS_EMBEDDED_CUSTOM
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 #endif
 #ifdef ENV_IS_EMBEDDED
 /* WARNING - the following is hand-optimized to fit within
@@ -122,11 +118,11 @@
  * it linked after the configuration sector.
  */
 # define LDS_BOARD_TEXT \
-	cpu/blackfin/traps.o		(.text .text.*); \
-	cpu/blackfin/interrupt.o	(.text .text.*); \
-	cpu/blackfin/serial.o		(.text .text.*); \
+	arch/blackfin/cpu/traps.o		(.text .text.*); \
+	arch/blackfin/cpu/interrupt.o	(.text .text.*); \
+	arch/blackfin/cpu/serial.o		(.text .text.*); \
 	common/dlmalloc.o		(.text .text.*); \
-	lib_generic/crc32.o		(.text .text.*); \
+	lib/crc32.o		(.text .text.*); \
 	. = DEFINED(env_offset) ? env_offset : .; \
 	common/env_embedded.o		(.text .text.*);
 #endif
@@ -137,15 +133,13 @@
  */
 #define CONFIG_BFIN_TWI_I2C	1
 #define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_SPEED	50000
-#define CONFIG_SYS_I2C_SLAVE	0
 
 
 /*
  * SPI_MMC Settings
  */
 #define CONFIG_MMC
-#define CONFIG_BFIN_SPI_MMC
+#define CONFIG_SPI_MMC
 
 
 /*
@@ -157,7 +151,6 @@
 
 #define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2))
 #define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1))
-#define BFIN_NAND_READY     PF3
 #define BFIN_NAND_WRITE(addr, cmd) \
 	do { \
 		bfin_write8(addr, cmd); \
@@ -166,21 +159,34 @@
 
 #define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
 #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
-#define NAND_PLAT_DEV_READY(chip)      (bfin_read_PORTFIO() & BFIN_NAND_READY)
-#define NAND_PLAT_INIT() \
-	do { \
-		bfin_write_PORTF_FER(bfin_read_PORTF_FER() & ~BFIN_NAND_READY); \
-		bfin_write_PORTFIO_DIR(bfin_read_PORTFIO_DIR() & ~BFIN_NAND_READY); \
-		bfin_write_PORTFIO_INEN(bfin_read_PORTFIO_INEN() | BFIN_NAND_READY); \
-	} while (0)
+#define NAND_PLAT_GPIO_DEV_READY       GPIO_PF3
 
 
 /*
  * CF-CARD IDE-HDD Support
  */
-/* #define CONFIG_BFIN_TRUE_IDE */	/* Add CF flash card support */
-/* #define CONFIG_BFIN_CF_IDE */	/* Add CF flash card support */
-/* #define CONFIG_BFIN_HDD_IDE */	/* Add IDE Disk Drive (HDD) support */
+
+/*
+ * Add CF flash card support in TRUE-IDE Mode (CF-IDE-NAND Card)
+ * Strange address mapping Blackfin A13 connects to CF_A0
+ */
+
+/* #define CONFIG_BFIN_TRUE_IDE */
+
+/*
+ * Add CF flash card support in Common Memory Mode (CF-IDE-NAND Card)
+ * This should be the preferred mode
+ */
+
+/* #define CONFIG_BFIN_CF_IDE */
+
+/*
+ * Add IDE Disk Drive (HDD) support
+ * See example interface here:
+ * http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:ide-blackfin
+ */
+
+/* #define CONFIG_BFIN_HDD_IDE */
 
 #if defined(CONFIG_BFIN_CF_IDE) || \
     defined(CONFIG_BFIN_HDD_IDE) || \
@@ -218,7 +224,7 @@
 #define CONFIG_SYS_ATA_DATA_OFFSET	0x0020	/* data I/O */
 #define CONFIG_SYS_ATA_REG_OFFSET	0x0020	/* normal register accesses */
 #define CONFIG_SYS_ATA_ALT_OFFSET	0x001C	/* alternate registers */
-#define CONFIG_SYS_ATA_STRIDE		2	/* CF.A0 --> Blackfin.Ax */
+#define CONFIG_SYS_ATA_STRIDE		2	/* CF.A0 --> Blackfin.A13 */
 
 #elif defined(CONFIG_BFIN_CF_IDE)
 #define CONFIG_SYS_ATA_BASE_ADDR	0x20211800
@@ -226,7 +232,7 @@
 #define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	/* data I/O */
 #define CONFIG_SYS_ATA_REG_OFFSET	0x0000	/* normal register accesses */
 #define CONFIG_SYS_ATA_ALT_OFFSET	0x000E	/* alternate registers */
-#define CONFIG_SYS_ATA_STRIDE		1	/* CF.A0 --> Blackfin.Ax */
+#define CONFIG_SYS_ATA_STRIDE		1	/* CF_A0=0, with /CE1 /CE2 odd/even byte selects */
 
 #elif defined(CONFIG_BFIN_HDD_IDE)
 #define CONFIG_SYS_ATA_BASE_ADDR	0x20314000
@@ -249,14 +255,22 @@
 #define CONFIG_RTC_BFIN
 #define CONFIG_UART_CONSOLE	0
 
-/* #define CONFIG_BF537_STAMP_LEDCMD	1 */
-
 /* Define if want to do post memory test */
 #undef CONFIG_POST
 #ifdef CONFIG_POST
 #define FLASH_START_POST_BLOCK	11	/* Should > = 11 */
 #define FLASH_END_POST_BLOCK	71	/* Should < = 71 */
 #endif
+#define CONFIG_SYS_POST_WORD_ADDR	0xFF903FFC
+
+/* These are for board tests */
+#if 0
+#define CONFIG_BOOTCOMMAND       "bootldr 0x203f0100"
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_PROMPT \
+	"autoboot in %d seconds: press space to stop\n", bootdelay
+#define CONFIG_AUTOBOOT_STOP_STR " "
+#endif
 
 
 /*