X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fbf537-stamp.h;h=a302f839a1ec239b9d96e83d4a5b26374a717f91;hb=7edb1f7b86e31a21253fc89bd2bebf7d20ed36a5;hp=2d1930c3665e367a996ba1521b905ac4ab0ad030;hpb=ac8983bcba75576c50307b5e8dc8fb848740ee61;p=u-boot

diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index 2d1930c366..a302f839a1 100644
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -11,6 +11,7 @@
 /*
  * Processor Settings
  */
+#define CONFIG_BFIN_CPU             bf537-0.2
 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
 
 
@@ -51,7 +52,7 @@
 #define CONFIG_EBIU_AMBCTL0_VAL	0x7BB07BB0
 #define CONFIG_EBIU_AMBCTL1_VAL	0xFFC27BB0
 
-#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
+#define CONFIG_SYS_MONITOR_LEN		(768 * 1024)
 #define CONFIG_SYS_MALLOC_LEN		(384 * 1024)
 
 
@@ -62,12 +63,11 @@
 #define ADI_CMDS_NETWORK	1
 #define CONFIG_BFIN_MAC
 #define CONFIG_NETCONSOLE	1
-#define CONFIG_NET_MULTI	1
 #endif
 #define CONFIG_HOSTNAME		bf537-stamp
 /* Uncomment next line to use fixed MAC address */
 /* #define CONFIG_ETHADDR	02:80:ad:20:31:e8 */
-
+#define CONFIG_LIB_RAND
 
 /*
  * Flash Settings
@@ -118,8 +118,8 @@
  * it linked after the configuration sector.
  */
 # define LDS_BOARD_TEXT \
-	arch/blackfin/lib/libblackfin.o (.text*); \
-	arch/blackfin/cpu/libblackfin.o (.text*); \
+	arch/blackfin/lib/built-in.o (.text*); \
+	arch/blackfin/cpu/built-in.o (.text*); \
 	. = DEFINED(env_offset) ? env_offset : .; \
 	common/env_embedded.o (.text*);
 #endif
@@ -135,14 +135,17 @@
 /*
  * SPI_MMC Settings
  */
+#define CONFIG_MMC_SPI
+#ifdef CONFIG_MMC_SPI
 #define CONFIG_MMC
-#define CONFIG_SPI_MMC
-
+#define CONFIG_GENERIC_MMC
+#endif
 
 /*
  * NAND Settings
  */
 /* #define CONFIG_NAND_PLAT */
+#ifdef CONFIG_NAND_PLAT
 #define CONFIG_SYS_NAND_BASE		0x20212000
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 
@@ -157,7 +160,7 @@
 #define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
 #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
 #define NAND_PLAT_GPIO_DEV_READY       GPIO_PF3
-
+#endif /* CONFIG_NAND_PLAT */
 
 /*
  * CF-CARD IDE-HDD Support
@@ -251,14 +254,21 @@
 #define CONFIG_MISC_INIT_R
 #define CONFIG_RTC_BFIN
 #define CONFIG_UART_CONSOLE	0
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
 
 /* Define if want to do post memory test */
 #undef CONFIG_POST
 #ifdef CONFIG_POST
-#define FLASH_START_POST_BLOCK	11	/* Should > = 11 */
-#define FLASH_END_POST_BLOCK	71	/* Should < = 71 */
+#define CONFIG_SYS_POST_HOTKEYS_GPIO	GPIO_PF5
+#define CONFIG_POST_BSPEC1_GPIO_LEDS \
+	GPIO_PF6, GPIO_PF7, GPIO_PF8, GPIO_PF9, GPIO_PF10, GPIO_PF11,
+#define CONFIG_POST_BSPEC2_GPIO_BUTTONS \
+	GPIO_PF5, GPIO_PF4, GPIO_PF3, GPIO_PF2,
+#define CONFIG_POST_BSPEC2_GPIO_NAMES \
+	10, 11, 12, 13,
+#define CONFIG_SYS_POST_FLASH_START	11
+#define CONFIG_SYS_POST_FLASH_END	71
 #endif
-#define CONFIG_SYS_POST_WORD_ADDR	0xFF903FFC
 
 /* These are for board tests */
 #if 0