X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fbf538f-ezkit.h;h=b1d4f263aed1f3ce9346d390f669a2936b74a76d;hb=10a28644941327dc26760bc06294a5f588b46d30;hp=91622e37a6ccc23784900fd2bcf33d3b4a4b8b10;hpb=9ff67e5e4c719556d57f136a6453f8e4798d85c0;p=u-boot

diff --git a/include/configs/bf538f-ezkit.h b/include/configs/bf538f-ezkit.h
index 91622e37a6..b1d4f263ae 100644
--- a/include/configs/bf538f-ezkit.h
+++ b/include/configs/bf538f-ezkit.h
@@ -60,11 +60,9 @@
  * Network Settings
  */
 #define ADI_CMDS_NETWORK	1
-#define CONFIG_DRIVER_SMC91111	1
+#define CONFIG_SMC91111	1
 #define CONFIG_SMC91111_BASE	0x20310300
 #define CONFIG_HOSTNAME		bf538f-ezkit
-/* Uncomment next line to use fixed MAC address */
-/* #define CONFIG_ETHADDR	02:80:ad:20:31:e8 */
 
 
 /*
@@ -83,13 +81,10 @@
  */
 #define CONFIG_BFIN_SPI
 #define CONFIG_ENV_SPI_MAX_HZ	30000000
-#define CONFIG_SF_DEFAULT_HZ	30000000
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_ATMEL
-#define CONFIG_SPI_FLASH_SPANSION
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SPI_FLASH_WINBOND
-
+/*
+#define CONFIG_SF_DEFAULT_SPEED	30000000
+#define CONFIG_SPI_FLASH_ALL
+*/
 
 /*
  * Env Storage Settings
@@ -109,7 +104,7 @@
 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
 #define ENV_IS_EMBEDDED
 #else
-#define ENV_IS_EMBEDDED_CUSTOM
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 #endif
 #ifdef ENV_IS_EMBEDDED
 /* WARNING - the following is hand-optimized to fit within
@@ -118,23 +113,18 @@
  * it linked after the configuration sector.
  */
 # define LDS_BOARD_TEXT \
-	cpu/blackfin/traps.o		(.text .text.*); \
-	cpu/blackfin/interrupt.o	(.text .text.*); \
-	cpu/blackfin/serial.o		(.text .text.*); \
-	common/dlmalloc.o		(.text .text.*); \
-	lib_generic/crc32.o		(.text .text.*); \
+	arch/blackfin/lib/built-in.o (.text*); \
+	arch/blackfin/cpu/built-in.o (.text*); \
 	. = DEFINED(env_offset) ? env_offset : .; \
-	common/env_embedded.o		(.text .text.*);
+	common/env_embedded.o (.text*);
 #endif
 
 
 /*
  * I2C Settings
  */
-#define CONFIG_BFIN_TWI_I2C	1
-#define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_SPEED	50000
-#define CONFIG_SYS_I2C_SLAVE	0
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
 
 
 /*
@@ -143,7 +133,6 @@
 #define CONFIG_RTC_BFIN
 #define CONFIG_UART_CONSOLE	0
 
-
 /*
  * Pull in common ADI header for remaining command/environment setup
  */