X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fbf561-ezkit.h;h=2fefe98f85e625a5a89f535aa1d787fbb65f65de;hb=89ca873e2ddea859526f25f678fa53dda055e90f;hp=1a9d27ea2a04f673e6bdae92b4690d0b6d6f982d;hpb=31a4f1e5b6ee9b6335f0313dce7637cef887f84f;p=u-boot

diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h
index 1a9d27ea2a..2fefe98f85 100644
--- a/include/configs/bf561-ezkit.h
+++ b/include/configs/bf561-ezkit.h
@@ -1,5 +1,5 @@
 /*
- * U-boot - Configuration file for BF561 EZKIT board
+ * U-Boot - Configuration file for BF561 EZKIT board
  */
 
 #ifndef __CONFIG_BF561_EZKIT_H__
@@ -7,14 +7,12 @@
 
 #include <asm/config-pre.h>
 
-
 /*
  * Processor Settings
  */
 #define CONFIG_BFIN_CPU             bf561-0.3
 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
 
-
 /*
  * Clock Settings
  *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
@@ -38,7 +36,6 @@
 /* Values can range from 1-15						*/
 #define CONFIG_SCLK_DIV			6
 
-
 /*
  * Memory Settings
  */
@@ -55,7 +52,6 @@
 #define CONFIG_SYS_MONITOR_LEN	(256 * 1024)
 #define CONFIG_SYS_MALLOC_LEN	(128 * 1024)
 
-
 /*
  * Network Settings
  */
@@ -64,9 +60,6 @@
 #define CONFIG_SMC91111_BASE	0x2C010300
 #define CONFIG_SMC_USE_32_BIT	1
 #define CONFIG_HOSTNAME		bf561-ezkit
-/* Uncomment next line to use fixed MAC address */
-/* #define CONFIG_ETHADDR	02:80:ad:20:31:e8 */
-
 
 /*
  * Flash Settings
@@ -84,20 +77,28 @@
 #define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
 #define CONFIG_ENV_SECT_SIZE	0x2000
 
-
 /*
  * I2C Settings
  */
-#define CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C_SOFT
+#ifdef CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C
 #define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0
 #define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1
-
+#define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0
+#endif
 
 /*
  * Misc Settings
  */
 #define CONFIG_UART_CONSOLE	0
 
+/*
+ * Run core 1 from L1 SRAM start address when init uboot on core 0
+ */
+/* #define CONFIG_CORE1_RUN	1 */
 
 /*
  * Pull in common ADI header for remaining command/environment setup