X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fbf609-ezkit.h;h=878009ff6615a2e4f2e6aa8c4b75ec8d785e2311;hb=ad970756208864de4b353b77bfb04c0fb4fc5ab5;hp=02149fa94df9849bc57568aae08f7643bb1d8e70;hpb=1c9f47ab2a2e9b62d08d39bfb9c4adc8f8edc5da;p=u-boot

diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h
index 02149fa94d..878009ff66 100644
--- a/include/configs/bf609-ezkit.h
+++ b/include/configs/bf609-ezkit.h
@@ -72,16 +72,17 @@
 #define CONFIG_NET_MULTI
 #define CONFIG_HOSTNAME		"bf609-ezkit"
 #define CONFIG_DESIGNWARE_ETH
+#define CONFIG_PHY_ADDR		1
 #define CONFIG_DW_PORTS		1
-#define CONFIG_DW_AUTONEG
 #define CONFIG_DW_ALTDESCRIPTOR
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_MII
 #define CONFIG_MII
+#define CONFIG_PHYLIB
 
 /* i2c Settings */
-#define CONFIG_BFIN_TWI_I2C
-#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
 
 /*
  * Flash Settings
@@ -144,10 +145,13 @@
 #define CONFIG_UART_CONSOLE	0
 
 #define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_SOFTSWITCH
 
 #define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 20*1024*1024 + 4)
 #define CONFIG_BFIN_SOFT_SWITCH
 
+#define CONFIG_ADI_GPIO2
+
 #if 0
 #define CONFIG_UART_MEM 1024
 #undef CONFIG_UART_CONSOLE
@@ -155,6 +159,13 @@
 #undef CONFIG_UART_CONSOLE_IS_JTAG
 #endif
 
+#define CONFIG_BOARD_SIZE_LIMIT $$((512 * 1024))
+
+/*
+ * Run core 1 from L1 SRAM start address when init uboot on core 0
+ */
+/* #define CONFIG_CORE1_RUN	1 */
+
 /*
  * Pull in common ADI header for remaining command/environment setup
  */