X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fblackstamp.h;h=7de425349fb46be5b00ffb9f1bd590f49d423f13;hb=a43febde4452f254621c0c95d452c89ad498e959;hp=64fce30584c643abcb245f90f02374f0dccea3af;hpb=8b3637c662e8a322f542942e5ee76b95ed9d9e39;p=u-boot

diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h
index 64fce30584..7de425349f 100644
--- a/include/configs/blackstamp.h
+++ b/include/configs/blackstamp.h
@@ -40,7 +40,6 @@
 #define SHARED_RESOURCES	1
 
 /* Is I2C bit-banged? */
-#undef CONFIG_SOFT_I2
 
 /*
  * Clock Settings
@@ -115,7 +114,7 @@
 # undef CONFIG_CMD_NET
 #endif
 
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
 # define CONFIG_CMD_I2C
 #endif
 
@@ -130,12 +129,12 @@
 #define CONFIG_BOOTCOMMAND   "run ramboot"
 #define CONFIG_BOOTARGS \
 	"root=/dev/mtdblock0 rw " \
-	"clkin_hz=" MK_STR(CONFIG_CLKIN_HZ) " " \
+	"clkin_hz=" __stringify(CONFIG_CLKIN_HZ) " " \
 	"earlyprintk=" \
 		"serial," \
-		"uart" MK_STR(CONFIG_UART_CONSOLE) "," \
-		MK_STR(CONFIG_BAUDRATE) " " \
-	"console=ttyBF0," MK_STR(CONFIG_BAUDRATE)
+		"uart" __stringify(CONFIG_UART_CONSOLE) "," \
+		__stringify(CONFIG_BAUDRATE) " " \
+	"console=ttyBF0," __stringify(CONFIG_BAUDRATE)
 
 #if defined(CONFIG_CMD_NET)
 # if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
@@ -149,7 +148,7 @@
 		"eeprom write $(loadaddr) 0x0 $(filesize)"
 #  else
 #   define UBOOT_ENV_UPDATE \
-		"sf probe " MK_STR(BFIN_BOOT_SPI_SSEL) ";" \
+		"sf probe " __stringify(BFIN_BOOT_SPI_SSEL) ";" \
 		"sf erase 0 0x40000;" \
 		"sf write $(loadaddr) 0 $(filesize)"
 #  endif
@@ -196,6 +195,7 @@
 #define CONFIG_BAUDRATE		57600
 #define CONFIG_LOADS_ECHO	1
 #define CONFIG_UART_CONSOLE	0
+#define CONFIG_BFIN_SERIAL
 
 /*
  * I2C settings
@@ -204,11 +204,11 @@
  * Note these pins are arbitrarily chosen because we aren't using
  * them yet. You can (and probably should) change these values!
  */
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
 #define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF9
 #define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF8
-#define CONFIG_SYS_I2C_SPEED		50000
-#define CONFIG_SYS_I2C_SLAVE		0xFE
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 #endif
 
 /*