X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fcl-som-am57x.h;h=6935b06d5c15ac91c014296bae206cbc518a75fa;hb=5a15ec19c84ebcca0a45870d28c3a3f7f5c085f5;hp=8297182a6c77352439af7dc3af22c8b6ffc9a680;hpb=99b02b4dce0b2fc759fb8ced5701c0d4fb7b2200;p=u-boot

diff --git a/include/configs/cl-som-am57x.h b/include/configs/cl-som-am57x.h
index 8297182a6c..6935b06d5c 100644
--- a/include/configs/cl-som-am57x.h
+++ b/include/configs/cl-som-am57x.h
@@ -11,14 +11,11 @@
 #ifndef __CONFIG_CL_SOM_AM57X_H
 #define __CONFIG_CL_SOM_AM57X_H
 
-#define CONFIG_DRA7XX
-
 #define CONFIG_NR_DRAM_BANKS		2
 
 #define CONSOLEDEV			"ttyO2"
 #define CONFIG_SYS_NS16550_COM3		UART3_BASE	/* UART3 */
 #define CONFIG_CONS_INDEX		3
-#define CONFIG_BAUDRATE			115200
 
 #define CONFIG_SYS_OMAP_ABE_SYSCK
 
@@ -28,23 +25,10 @@
 #define CONFIG_MISC_INIT_R
 #define CONFIG_REVISION_TAG
 
-/* Status LED */
-#define CONFIG_STATUS_LED		/* Status LED enabled */
-#define CONFIG_GPIO_LED
-#define CONFIG_BOARD_SPECIFIC_LED
-#define GREEN_LED_DEV			0
-					/* cl_som_am57x Green LED is GPIO2_5 */
-#define GREEN_LED_GPIO			37
-#define STATUS_LED_BIT			GREEN_LED_GPIO
-#define STATUS_LED_STATE		STATUS_LED_ON
-#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
-
 /* PMIC I2C bus number */
 #define CONFIG_SYS_SPD_BUS_NUM 3
 
 /* SPI Flash support */
-#undef  CONFIG_OMAP3_SPI
-
 #define CONFIG_TI_SPI_MMAP
 #define CONFIG_SF_DEFAULT_SPEED		48000000
 #define CONFIG_DEFAULT_SPI_MODE		SPI_MODE_3
@@ -56,15 +40,14 @@
 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
 
-/* SD/MMC RAW boot */
-#undef CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
-#undef CONFIG_SYS_MMCSD_FS_BOOT_PARTITION
+/* SD/MMC RAW/FS boot */
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
 
 /* Environment */
 #define CONFIG_ENV_SIZE			(16 << 10) /* 16 KiB env size */
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SECT_SIZE		(64 * 1024)
 #define CONFIG_ENV_OFFSET		(768 * 1024)
 #define CONFIG_ENV_SPI_MAX_HZ		48000000
@@ -74,16 +57,11 @@
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 #define CONFIG_SYS_I2C_EEPROM_BUS       3
 
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_EEPROM_LAYOUT
 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_EEPROM_SIZE		256
 
 #ifndef CONFIG_SPL_BUILD
 /* SATA */
-#define CONFIG_CMD_SCSI
-#define CONFIG_LIBATA
-#define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
 #define CONFIG_SYS_SCSI_MAX_LUN		1
@@ -91,28 +69,18 @@
 						CONFIG_SYS_SCSI_MAX_LUN)
 /* PCA9555 GPIO expander support */
 #define CONFIG_PCA953X
-#define CONFIG_CMD_PCA953X
-#define CONFIG_CMD_PCA953X_INFO
 #define CONFIG_SYS_I2C_PCA953X_ADDR     0x20
 #define CONFIG_SYS_I2C_PCA953X_WIDTH    { {0x20, 16} }
 
-/* GPT */
-#define CONFIG_CMD_GPT
-#define CONFIG_EFI_PARTITION
+#endif /* !CONFIG_SPL_BUILD */
 
 /* USB xHCI HOST */
 #define CONFIG_USB_XHCI_OMAP
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
 
 #define CONFIG_OMAP_USB_PHY
 #define CONFIG_OMAP_USB3PHY1_HOST
 
 /* USB Networking options */
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_USB_ETHER_RNDIS
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_MCS7830
 
 /* CPSW Ethernet */
 #define CONFIG_DRIVER_TI_CPSW
@@ -120,9 +88,7 @@
 #define CONFIG_BOOTP_DEFAULT
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_BOOTP_GATEWAY
-#define CONFIG_PHY_GIGE
 #define CONFIG_PHY_ATHEROS
-#define CONFIG_PHYLIB
 #define CONFIG_SYS_RX_ETH_BUFFER	64
 #define PHY_ANEG_TIMEOUT		8000
 
@@ -131,8 +97,6 @@
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_NET_RETRY_COUNT		10
 
-#endif /* !CONFIG_SPL_BUILD */
-
 /* Default environment */
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -148,8 +112,10 @@
 	"bootkernel=bootz ${loadaddr} - ${fdtaddr}\0" \
 	"mmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \
 	"mmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \
+	"emmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \
+	"emmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \
 	"load_mmc=mmc dev ${mmcdev} && mmc rescan && " \
-		"run mmcloadkernel run mmcloadfdt\0" \
+		"run mmcloadkernel && run mmcloadfdt\0" \
 	"mmcroot=/dev/mmcblk1p2\0" \
 	"mmcrootfstype=ext4 rw rootwait\0" \
 	"mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
@@ -185,7 +151,7 @@
 		"source ${loadaddr}\0" \
 	"sataboot=run load_sata && run sataargs && " \
 		"echo Booting from SATA ... && " \
-		"run bootkernel\0" \
+		"run bootkernel\0"
 
 #undef CONFIG_BOOTCOMMAND
 #define CONFIG_BOOTCOMMAND \