X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm-bf537e.h;h=78841cd74946707e8af5dc59d6c32d770c4dc638;hb=3bac8303e4840f6902a51f9665696ff3939596f4;hp=742df9c0199159fe6b4b9399d7d27ac3323935ac;hpb=9efac4a1eb99d9c5539aa6992025eeacab7980c6;p=u-boot diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h index 742df9c019..78841cd749 100644 --- a/include/configs/cm-bf537e.h +++ b/include/configs/cm-bf537e.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for CM-BF537E board + * U-Boot - Configuration file for CM-BF537E board */ #ifndef __CONFIG_CM_BF537E_H__ @@ -7,14 +7,12 @@ #include - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf537-0.2 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -41,7 +39,6 @@ /* Decrease core voltage */ #define CONFIG_VR_CTL_VAL (VLEV_115 | CLKBUFOE | GAIN_20 | FREQ_1000) - /* * Memory Settings */ @@ -55,23 +52,21 @@ #define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3) #define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3) -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) +#define CONFIG_SYS_MONITOR_LEN (768 * 1024) #define CONFIG_SYS_MALLOC_LEN (128 * 1024) - /* * Network Settings */ #ifndef __ADSPBF534__ #define ADI_CMDS_NETWORK 1 #define CONFIG_BFIN_MAC +#define CONFIG_SMC911X 1 +#define CONFIG_SMC911X_BASE 0x20308000 +#define CONFIG_SMC911X_16_BIT #define CONFIG_NETCONSOLE 1 -#define CONFIG_NET_MULTI 1 #endif #define CONFIG_HOSTNAME cm-bf537e -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ - /* * Flash Settings @@ -84,18 +79,22 @@ #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 35 +/* + * SPI Settings + */ +#define CONFIG_BFIN_SPI +#define CONFIG_ENV_SPI_MAX_HZ 30000000 /* * Env Storage Settings */ #define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x4000 -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x20000 +#define CONFIG_ENV_OFFSET 0x8000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#define CONFIG_ENV_SECT_SIZE 0x8000 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS) #define ENV_IS_EMBEDDED -#else -#define CONFIG_ENV_IS_EMBEDDED_IN_LDR #endif #ifdef ENV_IS_EMBEDDED /* WARNING - the following is hand-optimized to fit within @@ -104,22 +103,24 @@ * it linked after the configuration sector. */ # define LDS_BOARD_TEXT \ - arch/blackfin/cpu/traps.o (.text .text.*); \ - arch/blackfin/cpu/interrupt.o (.text .text.*); \ - arch/blackfin/cpu/serial.o (.text .text.*); \ - common/dlmalloc.o (.text .text.*); \ - lib/crc32.o (.text .text.*); \ + arch/blackfin/lib/built-in.o (.text*); \ + arch/blackfin/cpu/built-in.o (.text*); \ . = DEFINED(env_offset) ? env_offset : .; \ - common/env_embedded.o (.text .text.*); + common/env_embedded.o (.text*); #endif - /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI +/* + * SPI_MMC Settings + */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC_SPI /* * Misc Settings @@ -130,9 +131,9 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_BOOTCOMMAND "run flashboot" #define FLASHBOOT_ENV_SETTINGS \ - "flashboot=flread 20040000 1000000 300000;" \ + "flashboot=flread 20040000 1000000 3c0000;" \ "bootm 0x1000000\0" - +#define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024)) /* * Pull in common ADI header for remaining command/environment setup