X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm-bf548.h;h=a6d2fa8ae4bcc7c277a77f340b5a465fa20de2b3;hb=d060b00eff2124ad841d72aff47de5d516ead242;hp=b08b770e31adc34a0b0116131f8d755f1ace55a2;hpb=8b219cf07c186cc9d97354cf4b14f24a53d193c5;p=u-boot

diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h
index b08b770e31..a6d2fa8ae4 100644
--- a/include/configs/cm-bf548.h
+++ b/include/configs/cm-bf548.h
@@ -5,7 +5,7 @@
 #ifndef __CONFIG_CM_BF548_H__
 #define __CONFIG_CM_BF548_H__
 
-#include <asm/blackfin-config-pre.h>
+#include <asm/config-pre.h>
 
 
 /*
@@ -38,6 +38,9 @@
 /* Values can range from 1-15						*/
 #define CONFIG_SCLK_DIV			4
 
+/* Decrease core voltage */
+#define CONFIG_VR_CTL_VAL (VLEV_115 | GAIN_20 | FREQ_1000)
+
 
 /*
  * Memory Settings
@@ -61,7 +64,7 @@
 #define CONFIG_EBIU_FCTL_VAL	(BCLK_4)
 #define CONFIG_EBIU_MODE_VAL	(B0MODE_FLASH)
 
-#define CONFIG_SYS_MONITOR_LEN	(384 * 1024)
+#define CONFIG_SYS_MONITOR_LEN	(512 * 1024)
 #define CONFIG_SYS_MALLOC_LEN	(640 * 1024)
 
 
@@ -69,9 +72,9 @@
  * Network Settings
  */
 #define ADI_CMDS_NETWORK	1
-#define CONFIG_DRIVER_SMC911X	1
-#define CONFIG_DRIVER_SMC911X_BASE	0x24000000
-#define CONFIG_DRIVER_SMC911X_16_BIT
+#define CONFIG_SMC911X	1
+#define CONFIG_SMC911X_BASE	0x24000000
+#define CONFIG_SMC911X_16_BIT
 #define CONFIG_HOSTNAME		cm-bf548
 /* Uncomment next line to use fixed MAC address */
 /* #define CONFIG_ETHADDR	02:80:ad:24:31:91 */
@@ -95,7 +98,7 @@
 #define CONFIG_ENV_ADDR		0x20008000
 #define CONFIG_ENV_OFFSET	0x8000
 #define CONFIG_ENV_SIZE		0x8000
-#define ENV_IS_EMBEDDED_CUSTOM
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 
 
 /*
@@ -103,8 +106,6 @@
  */
 #define CONFIG_BFIN_TWI_I2C	1
 #define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_SPEED	50000
-#define CONFIG_SYS_I2C_SLAVE	0
 
 
 /*
@@ -114,6 +115,8 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_RTC_BFIN
 #define CONFIG_UART_CONSOLE	1
+#define CONFIG_BOOTCOMMAND	"run flashboot"
+#define FLASHBOOT_ENV_SETTINGS	"flashboot=bootm 0x20040000\0"
 
 #ifndef __ADSPBF542__
 /* Don't waste time transferring a logo over the UART */
@@ -136,6 +139,4 @@
  */
 #include <configs/bfin_adi_common.h>
 
-#include <asm/blackfin-config-post.h>
-
 #endif