X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm_fx6.h;h=90cf024bdb09f250791e0294add6ca0508e41c56;hb=c87c81186cf7e5073dbc7c5f46ad256a84f5ed22;hp=0dad9c3bd755a37f875a15ebe4f9a70da35a606a;hpb=2d221489df021393654805536be7effcb9d39702;p=u-boot

diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index 0dad9c3bd7..90cf024bdb 100644
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -13,13 +13,14 @@
 
 #include "mx6_common.h"
 
+#ifndef CONFIG_SPL_BUILD
+#include <config_distro_defaults.h>
+#endif
+
 /* Machine config */
 #define CONFIG_SYS_LITTLE_ENDIAN
 #define CONFIG_MACH_TYPE		4273
 
-/* CMD */
-#define CONFIG_CMD_MTDPARTS
-
 /* MMC */
 #define CONFIG_SYS_FSL_USDHC_NUM	3
 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
@@ -41,13 +42,8 @@
 /* Serial console */
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART4_BASE
-#define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
 
-/* Shell */
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-
 /* SPI flash */
 #define CONFIG_SF_DEFAULT_BUS		0
 #define CONFIG_SF_DEFAULT_CS		0
@@ -61,14 +57,7 @@
 #define CONFIG_SPI_FLASH_MTD
 #endif
 
-#define MTDIDS_DEFAULT		"nor0=spi0.0"
-#define MTDPARTS_DEFAULT	"mtdparts=spi0.0:" \
-				"768k(uboot)," \
-				"256k(uboot-environment)," \
-				"-(reserved)"
-
 /* Environment */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
 #define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
 #define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
@@ -77,7 +66,17 @@
 #define CONFIG_ENV_SIZE			(8 * 1024)
 #define CONFIG_ENV_OFFSET		(768 * 1024)
 
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 #define CONFIG_EXTRA_ENV_SETTINGS \
+	"fdt_high=0xffffffff\0" \
+	"initrd_high=0xffffffff\0" \
+	"fdt_addr_r=0x18000000\0" \
+	"ramdisk_addr_r=0x13000000\0" \
+	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+	"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
+	"fdtfile=undefined\0" \
 	"stdin=serial,usbkbd\0" \
 	"stdout=serial,vga\0" \
 	"stderr=serial,vga\0" \
@@ -86,24 +85,20 @@
 	"uImage=uImage-cm-fx6\0" \
 	"zImage=zImage-cm-fx6\0" \
 	"kernel=uImage-cm-fx6\0" \
-	"script=boot.scr\0" \
 	"dtb=cm-fx6.dtb\0" \
-	"bootm_low=18000000\0" \
-	"loadaddr=0x10800000\0" \
-	"fdtaddr=0x11000000\0" \
 	"console=ttymxc3,115200\0" \
 	"ethprime=FEC0\0" \
 	"video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \
 	"video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \
-	"doboot=bootm ${loadaddr}\0" \
+	"doboot=bootm ${kernel_addr_r}\0" \
 	"doloadfdt=false\0" \
-	"mtdids=" MTDIDS_DEFAULT "\0" \
-	"mtdparts=" MTDPARTS_DEFAULT "\0" \
+	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 	"setboottypez=setenv kernel ${zImage};" \
-		"setenv doboot bootz ${loadaddr} - ${fdtaddr};" \
+		"setenv doboot bootz ${kernel_addr_r} - ${fdt_addr_r};" \
 		"setenv doloadfdt true;\0" \
 	"setboottypem=setenv kernel ${uImage};" \
-		"setenv doboot bootm ${loadaddr};" \
+		"setenv doboot bootm ${kernel_addr_r};" \
 		"setenv doloadfdt false;\0"\
 	"mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
 	"sataroot=/dev/sda2 rw rootwait\0" \
@@ -127,17 +122,13 @@
 	"run_eboot=echo Starting EBOOT ...; "\
 		"mmc dev 2 && " \
 		"mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
-	"loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0"\
-	"loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0"\
-	"loadfdt=load ${storagetype} ${storagedev} ${fdtaddr} ${dtb};\0" \
-	"bootscript=echo Running bootscript from ${storagetype} ...;" \
-		   "source ${loadaddr};\0" \
-	"nandloadkernel=nand read ${loadaddr} 0 780000;\0" \
-	"nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \
+	"loadkernel=load ${storagetype} ${storagedev} ${kernel_addr_r} ${kernel};\0"\
+	"loadfdt=load ${storagetype} ${storagedev} ${fdt_addr_r} ${dtb};\0" \
+	"nandloadkernel=nand read ${kernel_addr_r} 0 780000;\0" \
+	"nandloadfdt=nand read ${fdt_addr_r} 780000 80000;\0" \
 	"setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \
 	"setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \
 	"setupnandboot=setenv storagetype nand;\0" \
-	"setupusbboot=setenv storagetype usb; setenv storagedev 0;\0" \
 	"storagebootcmd=echo Booting from ${storagetype} ...;" \
 			"run ${storagetype}args; run doboot;\0" \
 	"trybootk=if run loadkernel; then " \
@@ -146,46 +137,51 @@
 		"fi;" \
 		"run storagebootcmd;" \
 		"fi;\0" \
-	"trybootsmz=if run loadscript; then " \
-			"run bootscript;" \
-		"fi;" \
+	"trybootsmz=" \
 		"run setboottypem;" \
 		"run trybootk;" \
 		"run setboottypez;" \
-		"run trybootk;\0"
-
-#define CONFIG_BOOTCOMMAND \
-	"run setupmmcboot;" \
-	"mmc dev ${storagedev};" \
-	"if mmc rescan; then " \
-		"run trybootsmz;" \
-	"fi;" \
-	"run setupusbboot;" \
-	"if usb start; then "\
-		"if run loadscript; then " \
-			"run bootscript;" \
+		"run trybootk;\0" \
+	"legacy_bootcmd=" \
+		"run setupmmcboot;" \
+		"mmc dev ${storagedev};" \
+		"if mmc rescan; then " \
+			"run trybootsmz;" \
 		"fi;" \
-	"fi;" \
-	"run setupsataboot;" \
-	"if sata init; then " \
-		"run trybootsmz;" \
-	"fi;" \
-	"run setupnandboot;" \
-	"run nandboot;"
+		"run setupsataboot;" \
+		"if sata init; then " \
+			"run trybootsmz;" \
+		"fi;" \
+		"run setupnandboot;" \
+		"run nandboot;\0" \
+	"findfdt="\
+		"if test $board_name = Utilite && test $board_rev = MX6Q ; then " \
+			"setenv fdtfile imx6q-utilite-pro.dtb; fi; " \
+		"if test $fdtfile = undefined; then " \
+			"echo WARNING: Could not determine dtb to use; fi; \0" \
+	BOOTENV
 
 #define CONFIG_PREBOOT		"usb start;sf probe"
 
+#define BOOT_TARGET_DEVICES(func) \
+	func(USB, usb, 0) \
+	func(MMC, mmc, 2) \
+	func(SATA, sata, 0)
+
+#include <config_distro_bootcmd.h>
+#else
+#define CONFIG_EXTRA_ENV_SETTINGS
+#endif
+
 /* SPI */
 #define CONFIG_SPI
 #define CONFIG_MXC_SPI
 
 /* NAND */
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_BASE		0x40000000
 #define CONFIG_SYS_NAND_MAX_CHIPS	1
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_NAND_MXS
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 /* APBH DMA is required for NAND support */
 #define CONFIG_APBH_DMA
@@ -198,7 +194,6 @@
 #define CONFIG_FEC_MXC_PHYADDR		0
 #define CONFIG_FEC_XCV_TYPE		RGMII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 #define CONFIG_MII
 #define CONFIG_ETHPRIME			"FEC0"
@@ -225,11 +220,8 @@
 #define CONFIG_SYS_I2C_EEPROM_BUS	2
 
 /* SATA */
-#define CONFIG_CMD_SATA
 #define CONFIG_SYS_SATA_MAX_DEVICE	1
-#define CONFIG_LIBATA
 #define CONFIG_LBA48
-#define CONFIG_DWC_AHSATA
 #define CONFIG_DWC_AHSATA_PORT_ID	0
 #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
 
@@ -238,7 +230,6 @@
 #define CONFIG_SERIAL_TAG
 
 /* misc */
-#define CONFIG_STACKSIZE			(128 * 1024)
 #define CONFIG_SYS_MALLOC_LEN			(10 * 1024 * 1024)
 #define CONFIG_MISC_INIT_R
 
@@ -249,26 +240,20 @@
 
 /* Display */
 #define CONFIG_VIDEO_IPUV3
-#define CONFIG_IPUV3_CLK          260000000
 #define CONFIG_IMX_HDMI
 
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SOURCE
-#define CONFIG_CMD_BMP
 #define CONFIG_VIDEO_BMP_RLE8
 
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
 
 /* EEPROM */
-#define CONFIG_CMD_EEPROM
 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
 #define CONFIG_SYS_EEPROM_SIZE			256
 
-#define CONFIG_CMD_EEPROM_LAYOUT
-#define CONFIG_EEPROM_LAYOUT_HELP_STRING "v2, v3"
-
 #endif	/* __CONFIG_CM_FX6_H */