X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm_t35.h;h=e1bb24c00c0f94745ed94b077e7587ce0ce71533;hb=67a2616af18bbb38905b90ed1c6b66659671e1da;hp=1898e3837d52a097ccb12ac11026aba45611558a;hpb=5c84ad097d829bb1e6460438f33e1536b23b3c9b;p=u-boot diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 1898e3837d..e1bb24c00c 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2011 CompuLab, Ltd. * Mike Rapoport @@ -10,8 +11,6 @@ * Syed Mohammed Khasim * * Configuration settings for the CompuLab CM-T35 and CM-T3730 boards - * - * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H @@ -24,8 +23,6 @@ */ #define CONFIG_CM_T3X /* working with CM-T35 and CM-T3730 */ -#define CONFIG_SDRC /* The chip has SDRC controller */ - #include /* get chip and board defs */ #include @@ -64,7 +61,6 @@ /* * select serial console configuration */ -#define CONFIG_CONS_INDEX 3 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 #define CONFIG_SERIAL3 3 /* UART3 */ @@ -73,30 +69,15 @@ #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} -/* USB */ -#define CONFIG_USB_OMAP3 -#define CONFIG_USB_MUSB_UDC -#define CONFIG_TWL4030_USB - /* USB device configuration */ #define CONFIG_USB_DEVICE #define CONFIG_USB_TTY /* commands to include */ -#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define CONFIG_MTD_PARTITIONS -#define MTDIDS_DEFAULT "nand0=nand" -#define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\ - "1920k(u-boot),256k(u-boot-env),"\ - "4m(kernel),-(fs)" - -#define CONFIG_CMD_NAND /* NAND support */ #define CONFIG_SYS_I2C -#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 -#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 -#define CONFIG_SYS_I2C_OMAP34XX #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_I2C_EEPROM_BUS 0 @@ -110,7 +91,6 @@ /* * Board NAND Info. */ -#define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ /* to access nand */ #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ @@ -174,18 +154,8 @@ /* * Miscellaneous configurable options */ -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING #define CONFIG_TIMESTAMP #define CONFIG_SYS_AUTOLOAD "no" -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */ /* works on */ @@ -218,18 +188,8 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ -#define CONFIG_ENV_IS_IN_NAND -#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ -#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET -#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET - -#if defined(CONFIG_CMD_NET) -#define CONFIG_SMC911X -#define CONFIG_SMC911X_32_BIT -#define CM_T3X_SMC911X_BASE 0x2C000000 -#define SB_T35_SMC911X_BASE (CM_T3X_SMC911X_BASE + (16 << 20)) -#define CONFIG_SMC911X_BASE CM_T3X_SMC911X_BASE -#endif /* (CONFIG_CMD_NET) */ +#define CONFIG_ENV_OFFSET 0x260000 +#define CONFIG_ENV_ADDR 0x260000 /* additions for new relocation code, must be added to all boards */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 @@ -253,21 +213,14 @@ #define CONFIG_BMP_16BPP #define CONFIG_SCF0403_LCD -#define CONFIG_OMAP3_SPI - /* Defines for SPL */ -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_OMAP3_ID_NAND -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" /* NAND boot config */ #define CONFIG_SYS_NAND_5_ADDR_CYCLE @@ -298,7 +251,6 @@ * older x-loader implementations. And move the BSS area so that it * doesn't overlap with TEXT_BASE. */ -#define CONFIG_SYS_TEXT_BASE 0x80008000 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ @@ -306,14 +258,10 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* EEPROM */ -#define CONFIG_CMD_EEPROM #define CONFIG_ENV_EEPROM_IS_ON_I2C #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 #define CONFIG_SYS_EEPROM_SIZE 256 -#define CONFIG_CMD_EEPROM_LAYOUT -#define CONFIG_EEPROM_LAYOUT_HELP_STRING "legacy, v1, v2, v3" - #endif /* __CONFIG_H */