X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm_t43.h;h=9c24ba9965480238de9ccd38a56d5d6062658049;hb=983e37007da506e8145f9b3a9e1dce5c11116fb0;hp=f8c39bfa53ecc34a3e32a5e1553f6cb4ce9c1daa;hpb=4fb6055211b28c525fb45463ebe5da2757d9abc7;p=u-boot

diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h
index f8c39bfa53..9c24ba9965 100644
--- a/include/configs/cm_t43.h
+++ b/include/configs/cm_t43.h
@@ -18,11 +18,12 @@
 #include <asm/arch/omap.h>
 
 /* Serial support */
-#define CONFIG_DM_SERIAL
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_CLK		48000000
 #define CONFIG_SYS_NS16550_COM1		0x44e09000
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#endif
 
 /* NAND support */
 #define CONFIG_NAND
@@ -59,27 +60,13 @@
 #define CONFIG_SYS_RX_ETH_BUFFER	64
 
 /* USB support */
-#define CONFIG_USB_HOST
-#define CONFIG_USB_XHCI
 #define CONFIG_USB_XHCI_OMAP
-#define CONFIG_USB_XHCI_DWC3
-#define CONFIG_USB_STORAGE
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
 #define CONFIG_OMAP_USB_PHY
 #define CONFIG_AM437X_USB2PHY2_HOST
 
 /* SPI Flash support */
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_MACRONIX
-#define CONFIG_SPI_FLASH_ATMEL
-#define CONFIG_SPI_FLASH_EON
-#define CONFIG_SPI_FLASH_GIGADEVICE
-#define CONFIG_SPI_FLASH_SPANSION
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SPI_FLASH_SST
-#define CONFIG_SPI_FLASH_WINBOND
 #define CONFIG_TI_SPI_MMAP
-#define CONFIG_SPI_FLASH_BAR
 #define CONFIG_SF_DEFAULT_SPEED		48000000
 #define CONFIG_DEFAULT_SPI_MODE		SPI_MODE_3
 
@@ -91,7 +78,6 @@
 /* Enabling L2 Cache */
 #define CONFIG_SYS_L2_PL310
 #define CONFIG_SYS_PL310_BASE		0x48242000
-#define CONFIG_SYS_CACHELINE_SIZE	32
 
 /*
  * Since SPL did pll and ddr initialization for us,
@@ -104,14 +90,7 @@
 #define CONFIG_HSMMC2_8BIT
 
 #include <configs/ti_armv7_omap.h>
-#undef CONFIG_SPL_OS_BOOT
-#undef CONFIG_SPL_GPIO_SUPPORT
-#undef CONFIG_SPL_NAND_SUPPORT
-#undef CONFIG_SPL_BOARD_INIT
-#undef CONFIG_BOOTDELAY
-#include <config_distro_defaults.h>
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-#undef CONFIG_CMD_IMLS
+#undef CONFIG_SYS_MONITOR_LEN
 
 #define CONFIG_ENV_SIZE			(16 * 1024)
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
@@ -124,7 +103,7 @@
 #define CONFIG_ENV_OFFSET		(768 * 1024)
 #define CONFIG_ENV_SPI_MAX_HZ           48000000
 
-#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT		"arch/arm/mach-omap2/u-boot-spl.lds"
 
 /* Enhance our eMMC support / experience. */
 #define CONFIG_CMD_GPT
@@ -165,17 +144,24 @@
 		"run emmcboot; " \
 	"fi;"
 
-
 #define CONFIG_CONS_INDEX		1
 
 /* SPL defines. */
 #define CONFIG_SPL_TEXT_BASE		0x40300350
-#define CONFIG_SPL_MAX_SIZE		(64 * 1024)
 #define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + (128 << 20))
-#define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	(256 * 1024)
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
 #define CONFIG_SPL_SPI_LOAD
 
+/* EEPROM */
+#define CONFIG_CMD_EEPROM
+#define CONFIG_ENV_EEPROM_IS_ON_I2C
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
+#define CONFIG_SYS_EEPROM_SIZE			256
+
+#define CONFIG_CMD_EEPROM_LAYOUT
+#define CONFIG_EEPROM_LAYOUT_HELP_STRING "v2, v3"
+
 #endif	/* __CONFIG_CM_T43_H */