X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm_t54.h;h=14042ada7d07373b5770ac0d3cdb8f9edae1783c;hb=594e8d1c62128fc8391dc9c5649d364e4f69f028;hp=a129f688142ab448a9cd214aeac77c1fa3fcac34;hpb=563e53efaadd76def21612bcf9f0236d870b6e68;p=u-boot

diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h
index a129f68814..14042ada7d 100644
--- a/include/configs/cm_t54.h
+++ b/include/configs/cm_t54.h
@@ -16,15 +16,6 @@
 
 #include <configs/ti_omap5_common.h>
 
-#undef CONFIG_SPL_OS_BOOT
-
-/* Enable Generic board */
-#define CONFIG_SYS_GENERIC_BOARD
-
-/* Device Tree defines */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-
 /* EEPROM related defines */
 #define CONFIG_SYS_I2C_OMAP34XX
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
@@ -37,14 +28,6 @@
 /* UART setup */
 #define CONFIG_CONS_INDEX		4
 #define CONFIG_SYS_NS16550_COM4		UART4_BASE
-#define CONFIG_BAUDRATE			115200
-
-/* SD/MMC RAW boot */
-#undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
-#undef CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS
-
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x200 /* 0x40000 - 256 KB */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x300 /* 384 KB */
 
 /* MMC ENV related defines */
 #undef CONFIG_ENV_OFFSET
@@ -57,18 +40,16 @@
 #define CONFIG_ENV_SIZE			(16 << 10)	/* 16 KB */
 #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_CMD_SAVEENV
 
 /* Enhance our eMMC support / experience. */
 #define CONFIG_HSMMC2_8BIT
 #define CONFIG_SUPPORT_EMMC_BOOT
 
 /* SATA Boot related defines */
-#define CONFIG_SPL_SATA_SUPPORT
 #define CONFIG_SPL_SATA_BOOT_DEVICE		0
 #define CONFIG_SYS_SATA_FAT_BOOT_PARTITION	1
 
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
@@ -77,11 +58,6 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 						CONFIG_SYS_SCSI_MAX_LUN)
 /* USB UHH support options */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_HOST
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_OMAP
-#define CONFIG_USB_STORAGE
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
@@ -89,8 +65,13 @@
 #define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO	83 /* HSIC3 ETH #RESET */
 
 /* Enabled commands */
-#define CONFIG_CMD_DHCP		/* DHCP Support			*/
-#define CONFIG_CMD_PING
+
+/* EEPROM */
+#define CONFIG_ENV_EEPROM_IS_ON_I2C
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
+#define CONFIG_SYS_EEPROM_SIZE			256
 
 /* USB Networking options */
 #define CONFIG_USB_HOST_ETHER
@@ -99,21 +80,14 @@
 #define CONFIG_USB_ETHER_ASIX
 #define CONFIG_USB_ETHER_MCS7830
 
-/* Max time to hold reset on this board, see doc/README.omap-reset-time */
-#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC	16296
-
 /*
  * Miscellaneous configurable options
  */
 #undef CONFIG_SYS_AUTOLOAD
-#undef CONFIG_SYS_PROMPT
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #undef CONFIG_BOOTCOMMAND
-#undef CONFIG_BOOTDELAY
 
-#define CONFIG_BOOTDELAY		3
 #define CONFIG_SYS_AUTOLOAD		"no"
-#define CONFIG_SYS_PROMPT		"CM-T54 # "
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	DEFAULT_LINUX_BOOT_ENV \