X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm_t54.h;h=a3b1e5fe8b83d5a14ea5eaec78b43a7322a8797d;hb=584133665affa0963ca1025a8ad1feae015dee06;hp=641ab48c2c81d5fd7203905d18c6efec619d05d5;hpb=52658fda7abc4319ff7f8fe934d2e7c0a32202d7;p=u-boot

diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h
index 641ab48c2c..a3b1e5fe8b 100644
--- a/include/configs/cm_t54.h
+++ b/include/configs/cm_t54.h
@@ -16,16 +16,6 @@
 
 #include <configs/ti_omap5_common.h>
 
-#undef CONFIG_MISC_INIT_R
-#undef CONFIG_SPL_OS_BOOT
-
-/* Enable Generic board */
-#define CONFIG_SYS_GENERIC_BOARD
-
-/* Device Tree defines */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-
 /* EEPROM related defines */
 #define CONFIG_SYS_I2C_OMAP34XX
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
@@ -58,18 +48,26 @@
 #define CONFIG_ENV_SIZE			(16 << 10)	/* 16 KB */
 #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_CMD_SAVEENV
 
 /* Enhance our eMMC support / experience. */
 #define CONFIG_HSMMC2_8BIT
 #define CONFIG_SUPPORT_EMMC_BOOT
 
+/* SATA Boot related defines */
+#define CONFIG_SPL_SATA_BOOT_DEVICE		0
+#define CONFIG_SYS_SATA_FAT_BOOT_PARTITION	1
+
+#define CONFIG_SCSI
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
+#define CONFIG_SYS_SCSI_MAX_LUN		1
+#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+						CONFIG_SYS_SCSI_MAX_LUN)
 /* USB UHH support options */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_HOST
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_OMAP
-#define CONFIG_USB_STORAGE
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
@@ -77,9 +75,17 @@
 #define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO	83 /* HSIC3 ETH #RESET */
 
 /* Enabled commands */
-#define CONFIG_CMD_DHCP		/* DHCP Support			*/
-#define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
-#define CONFIG_CMD_PING
+
+/* EEPROM */
+#define CONFIG_CMD_EEPROM
+#define CONFIG_ENV_EEPROM_IS_ON_I2C
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
+#define CONFIG_SYS_EEPROM_SIZE			256
+
+#define CONFIG_CMD_EEPROM_LAYOUT
+#define CONFIG_EEPROM_LAYOUT_HELP_STRING "v2, v3"
 
 /* USB Networking options */
 #define CONFIG_USB_HOST_ETHER
@@ -95,14 +101,10 @@
  * Miscellaneous configurable options
  */
 #undef CONFIG_SYS_AUTOLOAD
-#undef CONFIG_SYS_PROMPT
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #undef CONFIG_BOOTCOMMAND
-#undef CONFIG_BOOTDELAY
 
-#define CONFIG_BOOTDELAY		3
 #define CONFIG_SYS_AUTOLOAD		"no"
-#define CONFIG_SYS_PROMPT		"CM-T54 # "
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	DEFAULT_LINUX_BOOT_ENV \