X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fcobra5272.h;h=0e8d4ac38bb371cf96cf77cad534ba52b9eb369c;hb=38045f54478f8272aa21079fc75cc647ab0b9179;hp=b13898815aef80cb53e04823cfaede76138d7c24;hpb=9cc18042e61275210cf888e5759347eeb2a2e297;p=u-boot

diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h
index b13898815a..0e8d4ac38b 100644
--- a/include/configs/cobra5272.h
+++ b/include/configs/cobra5272.h
@@ -7,7 +7,7 @@
  */
 
 /* ---
- * Version: U-boot 1.0.0 - initial release for Sentec COBRA5272 board
+ * Version: U-Boot 1.0.0 - initial release for Sentec COBRA5272 board
  * Date: 2004-03-29
  * Author: Florian Schlote
  *
@@ -24,24 +24,12 @@
 #ifndef _CONFIG_COBRA5272_H
 #define _CONFIG_COBRA5272_H
 
-/* ---
- * Define processor
- * possible values for Sentec board: only Coldfire M5272 processor supported
- * (please do not change)
- * ---
- */
-
-#define CONFIG_MCF52x2			/* define processor family */
-#define CONFIG_M5272			/* define processor type */
-
 /* ---
  * Defines processor clock - important for correct timings concerning serial
  * interface etc.
- * CONFIG_SYS_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms
  * ---
  */
 
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CLK			66000000
 #define CONFIG_SYS_SDRAM_SIZE		16		/* SDRAM size in MB */
 
@@ -116,6 +104,9 @@
 #define CONFIG_ENV_IS_IN_FLASH	1
 #endif
 
+#define LDS_BOARD_TEXT \
+        . = DEFINED(env_offset) ? env_offset : .; \
+        common/env_embedded.o (.text);
 
 /*
  * BOOTP options
@@ -125,17 +116,9 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_MII
 
 #ifdef CONFIG_MCFFEC
 #	define CONFIG_MII		1
@@ -166,12 +149,6 @@
 
 /*AUTOBOOT settings - booting images automatically by u-boot after power on*/
 
-#define CONFIG_BOOTDELAY	5		/* used for autoboot, delay in
-seconds u-boot will wait before starting defined (auto-)boot command, setting
-to -1 disables delay, setting to 0 will too prevent access to u-boot command
-interface: u-boot then has to reflashed */
-
-
 /* The following settings will be contained in the environment block ; if you
 want to use a neutral environment all those settings can be manually set in
 u-boot: 'set' command */
@@ -186,14 +163,11 @@ considered during boot */
 
 /* User network settings */
 
-#define CONFIG_ETHADDR 00:00:00:00:00:09	/* default ethernet MAC addr. */
 #define CONFIG_IPADDR 192.168.100.2		/* default board IP address */
 #define CONFIG_SERVERIP 192.168.100.1	/* default tftp server IP address */
 
 #endif
 
-#define CONFIG_SYS_PROMPT		"COBRA > "	/* Layout of u-boot prompt*/
-
 #define CONFIG_SYS_LOAD_ADDR		0x20000		/*Defines default RAM address
 from which user programs will be started */