X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fcolibri_vf.h;h=c7a34c2c7652b6a1587041cb875f2323fc3f5e28;hb=5a15ec19c84ebcca0a45870d28c3a3f7f5c085f5;hp=3f36d6a522ffd63e1e0991048930ee1c6b835d78;hpb=a5d67547dd9c7a527dfda1967010e703a22441ff;p=u-boot

diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 3f36d6a522..c7a34c2c76 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -14,20 +14,26 @@
 
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_VF610
-#define CONFIG_SYS_THUMB_BUILD
 #define CONFIG_SYS_FSL_CLK
 
-#define CONFIG_ARCH_MISC_INIT
 #define CONFIG_DISPLAY_BOARDINFO_LATE	/* Calls show_board_info() */
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
-#define CONFIG_CMD_FUSE
 #ifdef CONFIG_CMD_FUSE
 #define CONFIG_MXC_OCOTP
 #endif
 
+#ifdef CONFIG_VIDEO_FSL_DCU_FB
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_SYS_FSL_DCU_LE
+
+#define CONFIG_SYS_DCU_ADDR		DCU0_BASE_ADDR
+#define DCU_LAYER_MAX_NUM		64
+#endif
+
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 
@@ -35,43 +41,25 @@
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_ENV_VARS_UBOOT_CONFIG
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-#define CONFIG_BAUDRATE			115200
 
 /* NAND support */
-#define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR
 
 /* Dynamic MTD partition support */
-#define CONFIG_CMD_MTDPARTS	/* Enable 'mtdparts' command line support */
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
-#define MTDIDS_DEFAULT		"nand0=vf610_nfc"
-#define MTDPARTS_DEFAULT	"mtdparts=vf610_nfc:"		\
-				"128k(vf-bcb)ro,"		\
-				"1408k(u-boot)ro,"		\
-				"512k(u-boot-env),"		\
-				"-(ubi)"
 
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_ESDHC_NUM	1
 
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-#define CONFIG_CMD_UBIFS	/* increases size by almost 60 KB */
-
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE			ENET1_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE		RMII
 #define CONFIG_FEC_MXC_PHYADDR          0
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
 
 #define CONFIG_IPADDR		192.168.10.2
 #define CONFIG_NETMASK		255.255.255.0
@@ -81,8 +69,8 @@
 #define CONFIG_FDTADDR			0x84000000
 
 /* We boot from the gfxRAM area of the OCRAM. */
-#define CONFIG_SYS_TEXT_BASE		0x3f408000
-#define CONFIG_BOARD_SIZE_LIMIT		524288
+#define CONFIG_SYS_TEXT_BASE		0x3f401000
+#define CONFIG_BOARD_SIZE_LIMIT		520192
 
 #define SD_BOOTCMD \
 	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0"	\
@@ -135,8 +123,10 @@
 	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 	"source ${loadaddr}\0" \
 	"setupdate=run setsdupdate || run setusbupdate\0" \
-	"mtdparts=" MTDPARTS_DEFAULT "\0" \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
+	"video-mode=dcufb:640x480-16@60,monitor=lcd\0" \
+	"splashpos=m,m\0" \
 	SD_BOOTCMD \
 	NFS_BOOTCMD \
 	UBI_BOOTCMD
@@ -145,9 +135,6 @@
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #undef CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE		\
-			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
 #define CONFIG_SYS_MEMTEST_START	0x80010000
@@ -157,12 +144,6 @@
 #define CONFIG_SYS_HZ			1000
 #define CONFIG_CMDLINE_EDITING
 
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */
-
 /* Physical memory map */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			(0x80000000)
@@ -178,7 +159,6 @@
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* Environment organization */
-#define CONFIG_SYS_NO_FLASH
 
 #ifdef CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		0
@@ -192,10 +172,7 @@
 #define CONFIG_ENV_OFFSET		(12 * 64 * 2048)
 #endif
 
-#define CONFIG_SYS_NO_FLASH
-
 /* USB Host Support */
-#define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_VF
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET