X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fcorvus.h;h=61b014638e43ae13b4a38cf425169bc571018b69;hb=83d290c56fab2d38cd1ab4c4cc7099559c1d5046;hp=5e6094127ed006063c35e73e22d9f4d2a9267e7b;hpb=06572f0301c18e63b887efc91803bb9467e55dbe;p=u-boot

diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 5e6094127e..61b014638e 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Common board functions for siemens AT91SAM9G45 based boards
  * (C) Copyright 2013 Siemens AG
@@ -7,8 +8,6 @@
  * (C) Copyright 2007-2008
  * Stelian Pop <stelian@popies.net>
  * Lead Tech Design <www.leadtechdesign.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -24,8 +23,6 @@
  * hex number here!
  */
 
-#define CONFIG_SYS_TEXT_BASE  0x72000000
-
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
 
 /* ARM asynchronous clock */
@@ -36,8 +33,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
 
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
@@ -45,7 +40,6 @@
 #define CONFIG_AT91_GPIO_PULLUP	1	/* keep pullups on peripheral pins */
 
 /* serial console */
-#define CONFIG_ATMEL_USART
 #define CONFIG_USART_BASE		ATMEL_BASE_DBGU
 #define CONFIG_USART_ID			ATMEL_ID_SYS
 
@@ -59,14 +53,6 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_NAND
 
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS		1
@@ -74,10 +60,7 @@
 #define CONFIG_SYS_SDRAM_SIZE		0x08000000
 
 #define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_SDRAM_BASE + SZ_4K - GENERATED_GBL_DATA_SIZE)
-
-/* No NOR flash */
-#define CONFIG_SYS_NO_FLASH
+	(CONFIG_SYS_SDRAM_BASE + SZ_32K - GENERATED_GBL_DATA_SIZE)
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
@@ -95,19 +78,10 @@
 
 /* Ethernet */
 #define CONFIG_MACB
-#define CONFIG_PHYLIB
 #define CONFIG_RMII
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_AT91_WANTS_COMMON_PHY
 
-/* USB */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_ATMEL
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
-#define CONFIG_DOS_PARTITION
-
-/* USB DFU support */
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
 
@@ -118,7 +92,6 @@
 #define CONFIG_SYS_LOAD_ADDR	ATMEL_BASE_CS6
 
 /* bootstrap + u-boot + env in nandflash */
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET		0x100000
 #define CONFIG_ENV_OFFSET_REDUND	0x180000
 #define CONFIG_ENV_SIZE			SZ_128K
@@ -126,22 +99,6 @@
 #define CONFIG_BOOTCOMMAND						\
 	"nand read 0x70000000 0x200000 0x300000;"			\
 	"bootm 0x70000000"
-#define CONFIG_BOOTARGS							\
-	"console=ttyS0,115200 earlyprintk "				\
-	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
-	"256k(env),256k(env_redundant),256k(spare),"			\
-	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
-	"root=/dev/mtdblock7 rw rootfstype=jffs2"
-
-#define CONFIG_BAUDRATE			115200
-
-#define CONFIG_SYS_CBSIZE		256
-#define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE +	\
-				 sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
 
 /*
  * Size of malloc() pool
@@ -150,7 +107,6 @@
 				SZ_4M, 0x1000)
 
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x300000
 #define CONFIG_SPL_MAX_SIZE		(12 * SZ_1K)
 #define CONFIG_SPL_STACK		(SZ_16K)
@@ -158,7 +114,6 @@
 #define CONFIG_SPL_BSS_START_ADDR	CONFIG_SPL_MAX_SIZE
 #define CONFIG_SPL_BSS_MAX_SIZE		(SZ_2K)
 
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_ECC