X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fcsb226.h;h=0661d65aba4dfaa1e1bb8fd5b7b3439d00ab4e9e;hb=9844d027b52cc89264f6bf7686e26d9dc50134fd;hp=a24e34a5089634fac82b7e2f863879e6dbeb3a8b;hpb=6d0f6bcf337c5261c08fabe12982178c2c489d76;p=u-boot

diff --git a/include/configs/csb226.h b/include/configs/csb226.h
index a24e34a508..0661d65aba 100644
--- a/include/configs/csb226.h
+++ b/include/configs/csb226.h
@@ -42,6 +42,10 @@
 
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff      */
 					/* for timer/console/ethernet       */
+
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
 /*
  * Hardware drivers
  */
@@ -49,6 +53,7 @@
 /*
  * select serial console configuration
  */
+#define CONFIG_PXA_SERIAL
 #define CONFIG_FFUART		1	/* we use FFUART on CSB226          */
 
 /* allow to overwrite serial and ethaddr */
@@ -78,7 +83,7 @@
 #define CONFIG_CMD_FLASH
 #define CONFIG_CMD_MEMORY
 #define CONFIG_CMD_NET
-#define CONFIG_CMD_ENV
+#define CONFIG_CMD_SAVEENV
 #define CONFIG_CMD_RUN
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_ECHO
@@ -124,14 +129,12 @@
 #define CONFIG_SYS_MEMTEST_START	0xa0400000      /* memtest works on     */
 #define CONFIG_SYS_MEMTEST_END         0xa0800000      /* 4 ... 8 MB in DRAM   */
 
-#undef  CONFIG_SYS_CLKS_IN_HZ          /* everything, incl board info, in Hz */
-
 #define CONFIG_SYS_LOAD_ADDR           0xa3000000	/* default load address */
 						/* RS: where is this documented? */
 						/* RS: is this where U-Boot is  */
 						/* RS: relocated to in RAM?      */
 
-#define CONFIG_SYS_HZ                  3686400         /* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_HZ			1000
 						/* RS: the oscillator is actually 3680130?? */
 #define CONFIG_SYS_CPUSPEED            0x141           /* set core clock to 200/200/100 MHz */
 						/* 0101000001 */
@@ -147,9 +150,10 @@
 /*
  * Network chip
  */
-#define CONFIG_DRIVER_CS8900	1
-#define CS8900_BUS32		1
-#define CS8900_BASE		0x08000000
+#define CONFIG_NET_MULTI
+#define CONFIG_CS8900
+#define CONFIG_CS8900_BUS32
+#define CONFIG_CS8900_BASE	0x08000000
 
 /*
  * Stack sizes