X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fcsb226.h;h=a807d0084da9f9c54304bd23a52044f19440536f;hb=48d0192fe869948fef14b460b5f0c85bca933693;hp=a257b82eb3b9aebc870eb5ccde11debbf65d03a9;hpb=993cad9364c6b87ae429d1ed1130d8153f6f027e;p=u-boot

diff --git a/include/configs/csb226.h b/include/configs/csb226.h
index a257b82eb3..a807d0084d 100644
--- a/include/configs/csb226.h
+++ b/include/configs/csb226.h
@@ -33,17 +33,11 @@
 
 #define DEBUG 1
 
-/*
- * If we are developing, we might want to start U-Boot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- */
-#define CONFIG_INIT_CRITICAL		/* undef for developing */
-
 /*
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_PXA250 		1	/* This is an PXA250 CPU            */
+#define CONFIG_PXA250		1	/* This is an PXA250 CPU            */
 #define CONFIG_CSB226		1	/* on a CSB226 board                */
 
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff      */
@@ -63,10 +57,34 @@
 #define CONFIG_BAUDRATE		19200
 #undef  CONFIG_MISC_INIT_R		/* not used yet                     */
 
-#define CONFIG_COMMANDS (CFG_CMD_BDI|CFG_CMD_LOADB|CFG_CMD_IMI|CFG_CMD_FLASH|CFG_CMD_MEMORY|CFG_CMD_NET|CFG_CMD_ENV|CFG_CMD_RUN|CFG_CMD_ASKENV|CFG_CMD_ECHO|CFG_CMD_DHCP|CFG_CMD_CACHE)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_CACHE
+
 
 #define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTARGS		"console=ttyS0,19200 ip=192.168.1.10,192.168.1.5,,255,255,255,0,csb root=/dev/nfs, ether=0,0x08000000,eth0"
@@ -79,7 +97,7 @@
 
 #define CONFIG_CMDLINE_TAG	1
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	19200		/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
@@ -94,6 +112,7 @@
  *
  */
 #define CFG_MALLOC_LEN		(128*1024)
+#define CFG_GBL_DATA_SIZE	128		/* size in bytes reserved for initial data */
 
 #define CFG_LONGHELP				/* undef to save memory         */
 #define CFG_PROMPT		"uboot> "	/* Monitor Command Prompt       */
@@ -122,7 +141,7 @@
 
 #define CFG_MONITOR_LEN		0x20000		/* 128 KiB */
 
-                                                /* valid baudrates */
+						/* valid baudrates */
 #define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /*