X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fcsb472.h;h=aed5fa6a453e806759cfdf933c9fc525bd5f5bd7;hb=e87c2bda9c45bcfcc8239f6052d6fa9aec7351d6;hp=7b9f29ac32aa98db90ec462cdc5a3814b0798ce8;hpb=2e6e1772c0e34871769be4aef79748fe3e47d953;p=u-boot

diff --git a/include/configs/csb472.h b/include/configs/csb472.h
index 7b9f29ac32..aed5fa6a45 100644
--- a/include/configs/csb472.h
+++ b/include/configs/csb472.h
@@ -40,6 +40,8 @@
 #define CONFIG_LAST_STAGE_INIT	1	/* Call last_stage_init()	*/
 #define CONFIG_SYS_CLK_FREQ     25000000 /* external frequency to pll   */
 
+#define	CONFIG_SYS_TEXT_BASE	0xFFFC0000
+
 /*
  * OS Bootstrap configuration
  *
@@ -120,9 +122,6 @@
  *
  */
 #undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser */
-#ifdef	CONFIG_SYS_HUSH_PARSER
-#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "	/* hush shell secondary prompt */
-#endif
 
 #define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
 #define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
@@ -190,7 +189,6 @@
 #define CONFIG_PHY_CMD_DELAY	40	/* PHY COMMAND delay		*/
 					/* 32usec min. for LXT971A	*/
 #define CONFIG_PHY_RESET_DELAY	300	/* PHY RESET recovery delay	*/
-#define CONFIG_NET_MULTI
 
 /*
  * RTC configuration
@@ -250,7 +248,7 @@
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 #define CONFIG_SYS_FLASH_BASE		0xFF800000
 #define CONFIG_SYS_FLASH_SIZE		0x00800000
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 KB for Monitor */
 #define CONFIG_SYS_MALLOC_LEN		(128 * 1024) /* Reserve 128 KB for malloc() */
 
@@ -290,9 +288,8 @@
  *
  */
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of on-chip SRAM */
-#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_SIZE	128 /* byte size reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
@@ -301,13 +298,4 @@
  */
 #define CONFIG_I2CFAST		1	/* enable "i2cfast" env. setting     */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- *
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
-
 #endif	/* __CONFIG_H */